Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Boly SG2060 Series
Summary of Contents for Boly SG2060 Series
- Page 1 User Manual Hunting Camera SG560K/SG560X/SG562-C/SG2060 Series/SG562-D...
-
Page 2: Table Of Contents
Boly Trail Cameras Table of Contents 1.Getting Started ............... 2 2.Camera Operation ............5 2.1 Batteries/ Power Supply ........5 2.2 SD Card Information..........5 2.3 Camera Mode ............6 2.4 Trigger Mode ............7 3. Camera Setup Settings and Display.......9 3.1 Settings Interface &... -
Page 3: Getting Started
Boly Trail Cameras 1.Getting Started ① ② ③ ④ ⑤ ⑥ ⑧ ⑦ ② Flash: Available for SG560X/ ① IR LED ④ Mic SG2060-X/SG562-D ⑥ Lens ③ Indication ⑧ Speaker:Available for SG2060Series/ ⑤ PIR ⑦ Lock SG562-D User Manual / www.bolymedia.com... - Page 4 Boly Trail Cameras 4x1.7mm DC in Model Product Features SG560K-18mHD Black IR, 100ft detection range SG560X-18mHD Motion Sharp Camera, 100ft. detection range User Manual / www.bolymedia.com...
- Page 5 Boly Trail Cameras SG562-C White LED Flash Camera, color pictures videos night,Motion Sharp Technology SG562-D Combination White LED/Xenon Flash, color pictures and videos at night SG2060-X Motion Sharp 20MP Camera, Motion Sharp Technology, Dual Focus SG2060-U Ultra High Quality25MP Camera, Dual...
-
Page 6: Camera Operation
Boly Trail Cameras 2.Camera Operation 2.1 Batteries/ Power Supply The camera is powered by four or eight AA batteries. - High-density, high-performance, rechargeable Alkaline or NiMH batteries are recommended. When the batteries are low, the camera will beep twice and automatically shut down. -
Page 7: Camera Mode
Boly Trail Cameras The camera will operate properly with a locked SD card inserted, but the card will not be able to store captured images or videos taken by the camera. Do not remove the SD card while the camera is on. -
Page 8: Trigger Mode
Boly Trail Cameras SETUP Mode Customize the camera settings, or playback pictures and videos the camera has taken on the LCD display. OFF Mode Turn off the camera. The camera will still consume a small amount of battery power while in OFF mode - it is recommended to remove the batteries if the camera will not be used for a long period of time. - Page 9 Boly Trail Cameras to a non-zero value, the camera starts to work at a preset interval. Users need to set the PIR sensitivity to OFF if they want the camera to work only at preset intervals. PIR and Timer Triggering: For both PIR triggering and Timer...
-
Page 10: Camera Setup Settings And Display
Boly Trail Cameras 3. Camera Setup Settings and Display 3.1 Settings Interface & Display To update the camera settings, move the power switch to the SETUP position. Menu: Enter the program menu in preview mode : Exchange between playback and preview mode... -
Page 11: Manual Image / Video Capturing
Boly Trail Cameras 3.2 Manual Image / Video Capturing Place the camera in SETUP mode and press to manually capture photos or record video. Press again to stop capturing video. 3.3 Manage Images and/or Videos Place the camera in TEST/SETUP mode and press button to view images or videos. -
Page 12: Camera Setup Operation
Boly Trail Cameras 3.4 Camera Setup Operation To view the camera settings menu, slide the power switch to the setup position. Use the ▼ or ▲ buttons to select sub-menus; use ◄ or ► to select different options. Press ok to save the settings. - Page 13 Press ►◄to select date or time field. Photo Size Choose the image size, e.g.18MP, 12MP, 5MP or 25MP, 14MP, 8MP. Default:25MP(SG2060 series) Others:18MP Photo Burst Choose the number of continuous photos taken after each trigger. When the Camera Mode is set to Pic+Video,...
- Page 14 Far: the camera focuses at 0.8m to 1.5m/3.3m (SG2060 series) Near: the camera focuses at 0.4m to 0.8m (SG2060 series) Default: Far Available for SG560X/SG2060 series Video Size Choose the video size: 1920x1080,1280x720 or 640x480.(1920x1080 not available for SG560K-18mHD,) Default:1920x1080...
- Page 15 Boly Trail Cameras extends from 5 to 120 seconds or 180 seconds (for SG2060 Series). (SG560K-18mHD from 5 to 60 seconds) Default: 10Sec Time Lapse If time lapse is on, the camera can capture images or videos at a preset time interval regardless of whether motion is detected.
- Page 16 Boly Trail Cameras use high sensitivity in a room or environment with little interference. PIR Trigger / Normal: The default value is normal. Sensitivity Low: means the camera is not very responsive to motion. It is recommended to use this...
- Page 17 RIGHT to decrease or increase the desired PIR Interval time. Default: 5Sec Choose the days of the week the camera works on. Not available for SG2060 Series and Work Day SG560K-18mHD. Default: All This setting controls when the camera is active Working Hour each day.
- Page 18 It defines whether the date and time should be stamped on the picture or not. Available for Time Stamp SG560X Default: On Language Choose the language for the menu. Beep Sound Enable or disable the beep sound. Available for SG2060 series Default: On User Manual / www.bolymedia.com...
- Page 19 Boly Trail Cameras Allows the camera to play an audio file at a preset time each day. The audio file must be saved in the directory of \DCIM\100BMCIM\ with a name of AUDIxxxx(from 0000 to 9999).WAV after formatting the SD card and Game Call setting the game call to on.
-
Page 20: Appendix
Boly Trail Cameras Settings Version Contains version information. APPENDIX Mounting the Camera When mounting a camera to a tree, use either the mounting bracket or the strap provided. Tips: Try not to mount the camera when the sun is rising or setting.. - Page 21 Boly Trail Cameras the camera broken? A: The camera is not broken. What’s in front of the lens is IR-Cut filter. When the camera is powered on, the IR-Cut will reset and cover the lens. When the camera is powered off, the...
- Page 22 Boly Trail Cameras PIR Detection Zone This camera has a new PIR, which is patented. The new PIR’s detection range can reach 100ft. in good environments. The following picture compares the detection zone between the normal PIR and the new PIR.
-
Page 23: Technical Specifications
Boly Trail Cameras Technical Specifications Items SG562-D SG562-C SG560X/ SG2060Series SG560K Image Sensor 14MP F/NO=2.4 F/NO=2.4 Lens FOV=55° FOV=57° 100ft Detection Range Illumination 100ft 100ft 100ft 100ft Display Screen 2”LCD 2”LCD 2”LCD 2”LCD Picture Resolution 5MP/12MP/18MP 8/14/25MP Video Resolution 1080P/720P/VGA... - Page 24 The information contained herein is based on tests and data that Boly Inc. believes to be reliable, but the accuracy or completeness is not guaranteed. No warranty of any kind is made with respect to any of the above representations.
-
Page 25: Parts List
Boly Trail Cameras Parts List Part Name Quantity Digital Camera USB Cable Mounting Bracket Belt User’s Manual Warranty Card For more details about our product or user manual, please visit our website at: http://www.bolymedia.com/index User Manual / www.bolymedia.com... - Page 26 Boly Trail Cameras Version 3.1 User Manual / www.bolymedia.com...
Need help?
Do you have a question about the SG2060 Series and is the answer not in the manual?
Questions and answers