HP 81110A Quick Start Manual page 85

3 Press the
Output 1.
NOTE:
Figure 38
4 Press the
and
Modify Area.
Figure 39
NOTE:
HP 81110/04A Quick Start
softkey to enter the Timing menu. Switch
|TIMING|
Enter frequency of
It is recommended to set the width for channel 2 to 6.250 ns to
avoid a parameter conflict when switching on this channel.
The in the output 1 width entry field relate to the NRZ data
'-------'
output format selection.
Current TIMING Screen (for HP 81110A)
softkey to enter the Levels menu. Change
|LEVELS|
mode to ECL levels by selecting
Amplitude
Current LEVELS Screen
HP 81110A with HP 81112A 3.8V/330 MHz Output channels
installed have fixed 50
adjust for a load impedance different then 50
Getting Started
.
80 MHz
Set ECL
Ω
source impedance and does not offer to
Getting Started
Examples
the
ON
Offset
in the
Ω
.
87