FixMeStick Getting Started Manual page 4

IF YOU CAN'T GET INTO WINDOWS
YOU CAN STILL START A FIXMESTICK SCAN
NOTE: A FixMeStick scan can take several hours. You may want to run it overnight.
1
Power OFF your computer.
Remove the cap of your FixMeStick device and plug it into a USB port on your
2
computer. If you're using a desktop, try one of the ports at the back of the tower.
Power ON your PC and immediately start tapping F12 until you see the "Boot
3
Menu" or "Boot Device Options". If you see your login screen, it is too late and
you should power off your computer and try again. If F12 doesn't work try Esc, F8,
F10 or F11.
Your mouse will not work, so use the arrow keys on your keyboard to highlight
4
"FixMeStick" or "USB", then hit the Enter key.
You're in a FixMeStick scan when you see a series of numbered steps on your
5
screen. Be sure to register your FixMeStick in the top right of the scan screen to
get the latest updates and deals.
When finished, click "Clean Computer". Your computer will shutdown and reboot
6
into your normal operating system.
HAVING ISSUES? VISIT OUR SUPPORT CENTER TODAY SO WE CAN HELP YOU:
!
SUPPORT.FIXMESTICK.COM
©COPYRIGHT FIXMESTICK TECHNOLOGIES INC.
Suite 318, 642 Rue de Courcelle,
Montreal, QC, Canada, H4C3C5.
ALL RIGHTS RESERVED.
USING THE BOOT MENU
FixMeStick and the FixMeStick logo
®
are trademarks of FixMeStick Technologies Inc.
All other trademarks are trademarks of their respective owners.
QUESTIONS? support@fixmestick.com.