Philips AZ1605/17 User Manual page 15

CASSETTE RECORDER
Dubbing – Copying from tape deck 1 to deck 2
When dubbing, it is recommended to use full batteries or to
connect the set to the AC power supply.
1 Set the POWER slider to TAPE.
2 Set the HIGH SPEED DUBBING button to:
x for high speed dubbing,
w for normal speed dubbing.
Notes: – Do not press the HIGH SPEED DUBBING button during
dubbing.
– Dubbing at normal speed will take longer but results in a
better sound quality.
3 Press STOP·OPEN 9/ on both cassette compartments to open
them.
4 Insert the cassette to be copied into deck 1.
5 Insert a blank, unprotected cassette into deck 2 and close both
cassette compartments.
6 Press PAUSE ; and then RECORD 0 on deck 2.
7 Press PLAY 1 on deck 1.
™ The PAUSE ; key on deck 2 is released and dubbing starts
automatically.
8 For brief interruptions, press PAUSE ; on deck 2. To resume
recording, press the PAUSE ; key again.
9 To stop dubbing, press STOP·OPEN 9/ on both tape decks.
15