General Operation - Philips AZ1118/10 User Manual

OPERATION

GENERAL OPERATION

1. To switch on the set, use the source selector
2. Adjust the sound using the VOLUME control and DBB switch.
3. To switch off the set, set the source selector to TAPE/POWER/OFF
position, with the cassette keys released.
RADIO
1. Set the source selector to RADIO.
2. Adjust the sound using the VOLUME control and the DBB switch.
3. Select the wave band using the FM-MW band selector.
4. Tune to a radio station using the TUNING knob.
– For FM, pull out the telescopic aerial. To improve FM-reception,
incline and turn the aerial. Reduce its length if the FM-signal is
too strong (very close to a transmitter).
– For MW, the set is provided with a built-in aerial, so the
telescopic aerial is not needed. Direct the aerial by turning the
whole set.
5. To switch off the set, set the source selector to TAPE/POWER/OFF
position, with the cassette keys released.
6
RADIO
FM
SHUFFLE
STOP
SEARC H
MODE
MW
SHUFFLE
STOP
SEARC H
MODE