Wallaby Menu Bar - Mitsubishi Electric NP180 Series Setup Manual

Wallaby menu bar

The menu bar in Wallaby has the following functions.
File
Save Project
Saves the configuration information (p. 23) that has
been set in the Configuration tab into the computer.
Open Project
Opens the configuration information saved with the
above "Save Project" menu on Wallaby.
Save Calibration Data to Folder
Saves all the calibrated color data retained in
Wallaby into the computer.
 The "Save in Control Unit" menu in the
"Maintenance" tab (p. 26) saves the displaying
color data on the LED units into the control unit(s).
Open Calibration Data from Folder
Opens the color data saved in the computer with
the above "Save Calibration Data to folder" menu
on Wallaby.
Edit
Read parameters
Reads out the data in the selected control unit to
update the data in Wallaby. This operation is
normally no need. Wallaby automatically updates
necessary data whenever it communicates with the
control units.
38
NP180/160 Series Setup Manual
Read Calibration Data from Control
unit
Reads out the color data in all the control units to
Wallaby.
 The "Read from Control Unit" menu in the
"Maintenance" tab (p. 26) reads the data only
from the selected control unit(s).
Send Calibration Data to Control unit
Saves the color data in Wallaby into all the control
units.
 The "Save in Control Unit" menu in the
"Maintenance" tab (p. 26) saves in only the
selected control unit(s).
View
Log Window
Displays the communication log window.
Unit IP Address / Unit ID
Displays the IP address and the unit ID of each
control unit on the panel area in Wallaby.
Test Patterns
Displays an internal test pattern on the selected
control unit area.