TEMI Personal Robot User Manual page 26

Settings
Reactivate temi
To reactivate temi and switch its admin, go to settings > factory reset.
Note: All users, preset locations, and other stored information will be deleted!
Tutorials
Find basic tutorials on the mobile app and additional tutorials at www.robotemi.com/support.
Software update
Temi will automatically prompt when a software update is available. For more information regarding
software updates, refer to the Software Update section in this manual.
Change temi's nickname
Changing temi's nickname will change its contact info. To do so, go to Settings > temi's nick name.
Reset map
In case you sense temi's locationing and go-to are not functioning well, it is suggested to reset the map.
Note that such a reset will erase all preset locations.
To reset: Settings > Map > Reset Map
Manage wifi
To select or switch wifi network, go to Settings > Wi-Fi.
General Settings
• Welcoming mode – temi will detect a user within its line of sight and greet them
• Turn to Voice - temi will turn to where the voice is coming from [only when Alexa is selected
as the voice assistant]
• Hardware Button – When this feature is enabled, the interaction and volume buttons will not work.
• Stand By Mode – enabling this feature will cause temi's screen to dim and display a clock after 5 minutes
of inactivity.
Developer Tools
Use ADB Port Opening to install any custom-made applications on temi.
Your IP Address is available on the rop right corner.
Screen brightness
To adjust temi's screen brightness tap the volume buttons on top of temi's screen which will bring up the
brightness control bar.
Do not disturb mode
When "Do not disturb mode" is enabled your camera and microphone will be muted.
Calls and notifications will be silenced. If you received a call while in "Do not disturb mode"
your missed calls will appear in your recent calls list as missed.
Bluetooth
Go to Settings > Bluetooth to turn the feature ON or OFF and to pair your devices to temi.
The nickname you gave your temi is the same name that will appear to connect your devices to temi.
U S E R M A N U A L
Back to index
2 4