Computer Tcp/Ip Setting - Yamaha HY144-D-SRC Firmware Update Manual

To update Dante firmware, configure computer
TCP/IP settings.
Windows
1. Open the "Network and Sharing Center"
as described below.
Windows 7
Select [Start] → [Control Panel], then click or
double-click [Network and Sharing Center]
or [View network status and tasks].
Windows 8.1 and Windows 10
Right-click [Start] → [Control Panel], then
click or double-click [Network and Sharing
Center] or [View network status and tasks].
The "Network and Sharing Center" is
displayed.

Computer TCP/IP setting

2. Click [Manage network connection] or
[Change Adapter settings] from the
"Tasks" list located in the left side of
"Network and Sharing Center" window,
then double-click [Local Area
Connection].
The "Local Area Connection Status" dialog
box will be displayed.
NOTE
• The "User Account Control" dialog box may appear. Click
[Continue] or [Yes].
• If the "Local Area Connection properties" dialog box
appears, skip ahead to step 4.
3. Click [Properties].
The "Local Area Connection properties"
dialog box will be displayed.
HY144-D-SRC Firmware Update Guide
4