Philips AZ1027/05 User Manual page 2

1 Important
Safety
Important notes for users in the U.K.
Mains plug
This apparatus is fi tted with an approved 13 Amp plug. To change
a fuse in this type of plug proceed as follows:
Remove fuse cover and fuse.
a
Fix new fuse which should be a BS1362 3 Amp, A.S.T.A. or
b
BSI approved type.
Refi t the fuse cover.
c
If the fi tted plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fi tted in its place.
If the mains plug contains a fuse, this should have a value of 3
Amp. If a plug without a fuse is used, the fuse at the distribution
board should not be greater than 3 Amp.
Note: The severed plug must be disposed off to avoid a pos-
sible shock hazard should it be inserted into a 13 Amp socket
elsewhere.
How to connect a plug
The wires in the mains lead are coloured with the following code:
blue = neutral (N), brown = live (L).
As these colours may not correspond with the colour markings
identifying the terminals in your plug, proceed as follows:
•
Connect the blue wire to the terminal marked N or
coloured black.