Saving Parameter Settings: At&W; Resetting The Module To Factory Settings: At&F - Neoway N11 V2 At Command Manual

2.8 Saving Parameter Settings: AT&W
Description To save parameter settings
Format AT&W<CR>
Parameter N/A
Return Value See the Example
AT+REMOTEAT?
+REMOTEAT: 0
OK
AT+REMOTEAT=1
OK
AT&W
Example
OK
AT+REMOTEAT?
+REMOTEAT: 1
OK
AT&W0
OK

Remarks

2.9 Resetting the Module to Factory Settings: AT&F
Description To reset the module to the factory settings
Format AT&F[<value>]<CR>
Parameter <value>
Copyright © Neoway Technology Co., Ltd
The following commands support parameter saving:
ATE, +CMEE, ATV, ATQ, +CSCS, +COPS, +CCWA, +CREG, +CLIP,
+ENPWRSAVE, +DATAFORMAT,
+REMOTEAT, etc.
AT&W0 is equal to AT&W. To restore to the default settings, execute AT&F
or ATZ.
AT Command Manual
Query the current parameter value. The
value is 0.
Set commands that support parameter
saving.
Save parameter settings and restart the
module.
Query the current parameter value. The
value is 1.
Save parameter settings. This command
has the same function as AT&W.
+TRANMODE,
N11 V2
+RINGOUT,
15