Do you have a question about the FW790P/22 and is the answer not in the manual?
Questions and answers
Ramarao
April 4, 2025
Need to know transformer details & voltage details of FW790P
1 comments:
Mr. Anderson
April 4, 2025
The Philips FW790P/22 uses a mains transformer with the following voltage details:
- Primary: 230V AC (for operation in regions with 230V mains supply) - Secondary outputs (approximate): - 2x 17V AC (for amplifier power supply) - 1x 9V AC (for control circuits and display)
These AC voltages are then rectified and regulated within the system to provide the necessary DC voltages for various components.
This answer is automatically generated
Ramarao
April 9, 2025
Need to know transformer details and voltage details of FW750c
1 comments:
Mr. Anderson
April 10, 2025
The Philips FW750C uses a power transformer labeled A9017AKL with multiple secondary voltage outputs. The transformer provides the following voltage outputs:
- 2 x 18.8V AC (for audio amplifier section) - 2 x 10.5V AC (for other internal circuits) - 9.5V AC (for system control and display)
These AC voltages are rectified and regulated internally for various circuit sections of the system.
Need help?
Do you have a question about the FW790P/22 and is the answer not in the manual?
Questions and answers
Need to know transformer details & voltage details of FW790P
The Philips FW790P/22 uses a mains transformer with the following voltage details:
- Primary: 230V AC (for operation in regions with 230V mains supply)
- Secondary outputs (approximate):
- 2x 17V AC (for amplifier power supply)
- 1x 9V AC (for control circuits and display)
These AC voltages are then rectified and regulated within the system to provide the necessary DC voltages for various components.
This answer is automatically generated
Need to know transformer details and voltage details of FW750c
The Philips FW750C uses a power transformer labeled A9017AKL with multiple secondary voltage outputs. The transformer provides the following voltage outputs:
- 2 x 18.8V AC (for audio amplifier section)
- 2 x 10.5V AC (for other internal circuits)
- 9.5V AC (for system control and display)
These AC voltages are rectified and regulated internally for various circuit sections of the system.
This answer is automatically generated