Temperature Adjustment; Adjusting The Maximum Temperature Setting - Triton Bar Mixer Shower With Diverter Installation And Operating Instructions Manual

TEMPERATURE ADJUSTMENT

Important
The mixer has a temperature stop to prevent
accidental rotation to higher temperatures. This
is adjustable to provide a maximum temperature
of 35°C – 46°C.
The mixed water temperature can be adjusted
from cold through to a top limit (which can
be pre-set during installation – factory set
at approximately 38°C) with full anti-scald
protection throughout the range
Recommended outlet temperatures
The BuildCert TMV scheme recommends a
maximum mixed water outlet temperatures of
41°C for showers.
The mixed water temperatures must never
exceed 46°C.
The British Burns Association recommends 37°C
to 37.5°C as a comfortable bathing temperature
for children.
WARNINGS
Exposed metal surfaces may become hot during
use.
Bar mixer shower
Adjusting the maximum temperature
override setting
• Remove the temperature control by
removing the end cap and unscrewing the
retaining screw (fig.19).
• Turn the flow control to full flow.
With a steady flow running, adjust the
temperature valve spindle until the
temperature is about 38°C.
• When you are satisfied with the temperature
turn the flow control off. Refit the
temperature control. Secure with the screw
and replace the end cap.
14
Fig.19