Advertisement
Setup
Setup
Setting the clock
1
Press and hold
STANDBY-ON/ ECO POWER y
➜
The display shows the set time.
➜
-- --:-- -- displays by default if you have not set the clock.
2
In the standby mode, press and hold
control).
➜
The hours digits start flashing.
3
To switch between 12 hour and 24 hour display, press
remote control) repeatedly to set the hours.
4
Hold down or press
VOLUME +/-
5
Press
DISPLAY/CLOCK
6
Hold down or press
VOLUME +/-
7
Press
DISPLAY/CLOCK
Enjoy
Playing discs
With this system, you can play all pre-recorded audio CDs (CDDA), all finalized audio CD-Rs
and CD-RWs, MP3/WMA-CDs (CD-Rs/CD-RWs with MP3/WMA files)
1
Press
(or
SOURCE
CD
2
Press
OPEN/CLOSE ç
3
Insert a disc with the printed side facing outward. Then close the CD door.
4
Press
ÉÅ
to start playback.
5
To stop playback, press STOPÇ.
DISPLAY/CLOCK
repeatedly to set the hours.
(or
on the remote control) to confirm.
CLOCK
repeatedly to set the minutes.
(or
on the remote control) to confirm.
CLOCK
on the remote control) once or more to select CD.
to open the CD compartment.
to switch the set to Standby mode.
(or
on the remote
CLOCK
(or
PROGRAM
PROG
IMPORTANT!
– Remove the
protective
plastic tab
before using the
remote control.
Notes for remote control:
on the
– First, select the source you
wish to control by pressing one
of the source select keys on the
remote control (CD or TUNER,
for example).
– Then select the desired
function ( 2;, 4 , ¢ for
example).
Advertisement
