Advertisement
Important Safety Instructions:
•
Please read all instructions carefully before assembling.
•
For your safety, assembly by two or more adults is strongly recommended.
•
Keep instructions for future use.
•
Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural
integrity of the item.
Pre-assembly:
•
Remove all parts and hardware from the box and lay out on a clear carpeted or scratch-free work surface, as
this will avoid damaging parts during assembly. The shipping box provides an ideal work surface.
•
Do not dispose of any packaging or contents of the shipping carton until assembly is completed to avoid
accidentally discarding small parts or hardware.
•
Use the parts and hardware lists below to identify and separate each of the pieces included.
•
The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
•
The use of power tools to aid in assembly is not recommended. Power tools can damage hardware and split
wood.
•
Note: Do not fully tighten all the bolts until all parts are in place. Failure to follow these instructions may cause
the bolts to misalign during assembly.
HARDWARE INCLUDED:
(J) Allen Key – 1x
(M) Short Bolt M8x28mm – 8x
(P) Corner Bracket – 3x
(S) Long Screw 4x30mm – 56x
Date: 2015-DEC-26
Rev:
(K) Long Bolt M6x55mm – 16x
(N) Spring Washer M6 – 16x
(Q) Machine Screw 3/16"x15mm – 6x
(T) Long Metal Dowel Ø10 x 114mm – 4x
PARTS INCLUDED:
(A). Short End Board
(B). Tall End Board Left
(C). Tall End Board Right
(D). Side Rail
(E). Long Guardrail
(F). Short Guardrail
(G). Twin Bed Slats
(H). Full Bed Slats
(I). Ladder
Tools Required:
Philips Screwdriver (Not included)
Flat Head Screwdriver (Not included)
(L) Half-Moon Metal Block – 16x
(O). Flat Washer M6 – 16x
(R). Short Screw 4x19mm – 23x
(U). Short Metal Dowel Ø10 x 57mm – 4x
2x
1x
1x
4x
1x
1x
1x
1x
1x
Page 3 of 8
Advertisement
