Sealey VS940 Instructions

thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer Warning:
to instructions laser beam
1. safetY
warning! Ensure that Health & Safety, local authority and general workshop practice regulations are adhered to when using this
‰
equipment.
warning! DO NOT aim the laser beams at your or another person's or animal's eye and beware of reflections from mirrors or other
‰
shiny surfaces.
familiarise yourself with the applications, limitations, and potential hazards of the thermometer.
9
Keep the thermometer clean and in good condition.
9
Protect the thermometer from the following:
9
electro-magnetic fields from engine components, arc welders and induction heaters closer than 125mm.
static electricity.
thermal shock caused by large and/or rapid ambient temperature change.
High temperatures.
do not get the thermometer wet or use in damp or wet locations or areas where there is condensation.
8
do not take readings through transparent materials such as glass or clear plastic. the surface temperature of these materials will be
8
measured.
do not use the thermometer in areas where there is steam, dust or smoke. these conditons will result in erroneous readings.
8
do not use the thermometer for any purpose other than that for which it is designed.
8
do not allow untrained persons (particularly children) to operate the thermometer.
8
do not operate the thermometer when you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
1.1. laser safety
the Vs940 and Vs941 utilise a class ii laser that emits low levels of visible radiation (i.e. wavelengths between 400 and 700
nanometres) which are safe for the skin but not inherently safe for the eyes. the class ii emission limit is set at the maximum level for
which eye protection is normally afforded by natural aversion responses to bright light. Accidental eye exposure is therefore normally
safe, although the natural aversion response can be overridden by deliberately staring into the beam, and can also be influenced by
the use of alcohol
warning! do not look or stare into the laser beam as permanent eye damage could result.
‰
Be aware that reflections of the laser beam from mirrors or other shiny surfaces can be as hazardous as direct eye exposure.
2. introduction
i
detects energy in the infrared spectrum and displays the temperature on an 18mm lcd back-lit display. twin spot laser targeting enables
accurate readings by guiding user to the unit's optimum guiding distance - when the two laser dots merge into one, unit is reading a 13mm disc
of temperature. features data hold and auto power off. temperature can be shown in either °c or °f. Powered by 9V battery (supplied).
3. specification
model no: ................................................................... Vs940
focal ratio: ...................................................................... 12:1
temperature range: ....... -50°c to +650°c (-58°f to +1202°f)
Accuracy: .......................... ±2°c or ±2% whichever is greater
model no: ................................................................... Vs941
focal ratio: ...................................................................... 12:1
temperature range: .... -50°c to +1050°c (-58°f to + 1922°f)
Accuracy: .......................... ±2°c or ±2% whichever is greater
© Jack sealey limited
instructions for
twin laser infrared
digital thermometers 12:1
model no's:
or drugs.
Original Language Version
Vs940, Vs941
Vs941, Vs941 | issue 1 25/10/16