Get Started; Prepare The Remote Control - Philips DCM1075/96 User Manual

q OK
‡ &RQÀUP D VHOHFWLRQ
‡ For FM radio, select stereo or mono
sound output.
r PRESET/ALBUM
‡ Skip to the previous/next album.
‡ Select a preset radio station.
‡ Navigate through iPod/iPhone menu.
s FM
‡ Select FM radio source.
10 EN
/

3 Get started

Caution
‡
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
VHTXHQFH
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
rear of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________

Prepare the remote control

Caution
‡
Risk of explosion! Keep batteries away from heat,
VXQVKLQH RU ÀUH 1HYHU GLVFDUG EDWWHULHV LQ ÀUH
To insert the remote control battery:
1
Open the battery compartment.
2
Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
Note
‡
If you are not going to use the remote control for a
long time, remove the batteries.
‡
Do not use old and new or different types of batteries
in combination.
‡
Batteries contain chemical substances, so they should
be disposed of properly.