Page 1
User Guide Learn more about the features of your Keenetic at help.keenetic.com...
Page 2
To reset the administrator password and all managed by the assigned IP address. If there's user settings for all modes, press this button no DHCP server in the network, the Keenetic and hold for 10 seconds until the indicator settings can be accessed at 192.168.1.3. The starts flashing.
Page 3
Flashing frequently — indicates data transfer. Flashing slowly — a WPS session is in progress. Indicator (Status) On — the Keenetic is ready for operation. Button (Wi-Fi network control) Off — the Keenetic is turned off. By default this button allows you to easily connect new devices running Microsoft Flashing slowly —...
Page 4
Configuring with Keenetic web interface The Keenetic must be powered via the cable, using it to connect port 1 of the Keenetic supplied power adapter and ready for to the computer’s Ethernet adapter. work, with the indicator steady on. To access the Keenetic web interface open Connect the computer to the Keenetic.
Connect the Ethernet cable from your If you have an IPTV set-top box or a TV that can ISP to the "0" port on the Keenetic. receive IPTV directly, we recommend to connect it to the Keenetic using an Ethernet cable.
⬛ Remove all protective film before operating the ⬛ Never open the Keenetic or its power adapter device. and never try to service them on your own. If you suspect a hardware malfunction, please contact ⬛...
Page 7
Router. It provides link rate of 867 Mbps in the follow these guidelines: 5 GHz band and 300 Mbps in the 2.4 GHz band. ⬛ Install the Keenetic in a room where you want The link rate depends on Wi-Fi features supported to ensure the fastest wireless connection. Concrete by a client device, including standard, number walls greatly reduce the network speed.
Keenetic Support Center log at the Keenetics. We strongly recommend to device’s first connection to the Internet, or the make backup copies of important data.
Page 10
When you first connect to the 50/60Hz Internet the service tag is automatically recorded ⬛ Ethernet cable in the Keenetic Support Center log. By using the ⬛ User Guide Keenetic Air, you agree with right of Keenetic Limited to automatically receive information...
Need help?
Do you have a question about the AIR KN-1610 and is the answer not in the manual?
Questions and answers