Receiving A Call Through The System; Holding A Call Through The System; Listening To Music From The Connected Device Through The System - Philips BTM630/12 User Manual

5) Place the unit in line with your mouth.
If you will be using this unit while sitting down,
place the unit at tabletop level, in line with the
level of your mouth. Placing the unit on a high
cabinet or on the floor may reduce the pick-up of
the microphone.
Receiving a call through the system (for
a connected mobile phone supporting
the HFP and HSP profiles)
When there is an incoming call to the connected
mobile device, you will hear an incoming call
alert tone from the speakers of the system and
the display panel of the system will show "IN
CALL" and the calling number (if available). In
this case, you can:
●
Press ANSWER/PAIRING
the system or the remote control to accept the
call.
➜
The display panel of the system will show
"CALLING".
●
Press REJECT
on the top of the system or
the remote control to reject the call.
➜
The display panel of the system will show
"END CALL".
●
Press and hold ANSWER/PAIRING
top of the system or the remote control to
transfer sound from system speakers to the
mobile phone or conversely.
➜
The display panel of the system will show
"TRANSFER".
Holding a call through the system (for a
connected mobile phone supporting the
HFP and HSP profiles)
●
During a call, you can press MUTE on the
remote control to mute the microphone
(speakerphone) so that the other party cannot
hear your voice.
➜
The display panel of the system will show
"MIC MUTE".
To resume sound input of the
microphone
●
Press MUTE on the remote control again.
➜
"CALLING".
BTM630 allows you to connect your A2DP-
capable device and stream high-quality stereo
music over Bluetooth to the system for playback.
If the connected device also supports the
AVRCP profile, you can also control music
playback of the connected device from the
system or its remote control:
on the top of
●
Press É Å to start playback.
●
Press É Å again to pause playback.
●
Press
/ ™ on the remote control) to select a track.
● Press 9 to stop playback.
on the
Bluetooth Operation
The display panel of the system will show
Listening to music from the connected
device through the system (for a device
supporting the A2DP profile)
on the top of the system (or ¡
/
S T
27