Setting The Clock - Philips BTM630/12 Quick Start Manual

1
Connect the MW and FM antennas.
2
Connect the AC power adaptor of the system.

Setting the clock

1
In standby mode, press
➜ SET CLOCK is displayed briefly. Then, 12HR or 24HR is displayed.
2
Press
ALBUM•PRESET +/-
clock mode. Press
PROG
confirm.
➜
The clock digits for the hours continue to flash.
3
Press
ALBUM•PRESET +/-
hours.
4
Press on the system (or
PROG
➜
The clock digits for the minutes flash.
5
Press
ALBUM•PRESET +/-
minutes.
6
Press on the system (or
PROG
time.
FM wire antenna
2
on the system (or
PROG
on the system (or
3/4
on the system (or
PROG/CLOCK
on the system (or
3/4
PROG/CLOCK
on the system (or
3/4
PROG/CLOCK
1
AC power adaptor
on the remote control).
PROG/CLOCK
on the remote control) to select
on the remote control) to
on the remote control) to set the
on the remote control) again.
on the remote control) to set the
on the remote control) to confirm the
Tips
– See the User Manual for how to
connect other equipment to this
system.
– Use the supplied AC power
adaptor only! Using any other
power connection device may
damage your main set!
MW loop
antenna