Replacing The Scoring Blade For Rapido; Using The Allen Wrench; Rapido Saw Blades; Using The Internal Torx Wrench - Altendorf ElmoDrive F45 Operating Manual

Replacing the scoring blade for RAPIDO

Remove the adjustment unit from the machine. It may be necessary to loosen
the clamping screw because an excessively tight clamping screw can cause
the adjustment unit to jam on the shaft!
Dismantling

Using the Allen wrench:

•

Using the internal torx wrench:

•
•
•
0000010040-002- GB
Release the clamping screw (1), turn the spindle (2) approx. 3 – 4 turns
clockwise until the flange (3) can be removed from the holder (4).
Undo the screws (5).
Remove the circular saw blade (6).
Carefully clean the flange (3) and screws (5). Make sure that the running
and flange surfaces are dry and free of dust.
Operating
Fig. 6-125 RAPIDO saw blades
199
Operating