Ovlenable (Overload Event Enable Register) - Keysight Technologies InfiniiVision DSOX1204A Programmer's Manual

6
Root (:) Commands

:OVLenable (Overload Event Enable Register)

Command Syntax
:OVLenable <enable_mask>
<enable_mask> ::= 16-bit integer
The overload enable mask is an integer representing an input as described in the
following table.
The :OVLenable command sets the mask in the Overload Event Enable Register
and enables the reporting of the Overload Event Register. If enabled, such an
event will set bit 11 in the Operation Status Register.
15
Table 50 Overload Event Enable Register (OVL)
Bit
15-8
7
6
5-2
1
0
Query Syntax
:OVLenable?
The :OVLenable query returns the current enable mask value contained in the
Overload Event Enable Register.
154
(see page 798)
14 13 12 11 10
OR
To OVLR bit in
Op e rati o n Status
Register
Description
---
Channel 2 Fault
Channel 1 Fault
---
Channel 2 OVL
Channel 1 OVL
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
Chan2 Chan1
Fault Fault
9 8 7 6 5 4
When Set (1 = High = True), Enables:
(Not used.)
Event when fault occurs on Channel 2 input.
Event when fault occurs on Channel 1 input.
(Not used.)
Event when overload occurs on Channel 2 input.
Event when overload occurs on Channel 1 input.
:OVLR?
Chan2 Chan1
Overload Event Register
OVL OVL
3 2 1 0
:OVL
:OVL?
Overload Event Enable
(Mask) Register