Connecting to a computer ............12 Troubleshooting ..............14 Specifications ..............16 Technical Specifications ............16 THR30II Wireless, THR10II Wireless* Power Button LED status list ..........17 Signal Flow Diagrams ............... 18 Amp Modeling List ..............19 Reference Manual THR30II Wireless THR10II Wireless THR10II...
• Incorporates a chromatic auto tuner. * What is VCM Technology? An original physical modeling technology developed by Yamaha, VCM Technology reproduces the characteristics of analog circuitry at a micro level to accurately reproduce the sound of the modeled equipment.
* When the tuner function is set to ON, the guitar sound to the main speaker, [PHONES] jack, and [USB] jack is muted. The sounds from the [AUX] jack, [USB] jack and Bluetooth are output to the main speaker and [PHONES] jack. Reference Manual THR30II Wireless THR10II Wireless THR10II...
Page 4
Selects one of four different effects: CHORUS, FLANGER, PHASER, or TREMOLO. Turn the knob to the right to increase the amount of each effect. * Turn the knob fully to the left to set the effect OFF. Reference Manual THR30II Wireless THR10II Wireless THR10II...
Page 5
The save operation is complete when the memory number for the button being pushed appears in the LED Display w. Press one of the numbered buttons (less than 2 seconds) to recall the saved settings. * On the THR10II Wireless and THR10II, enable Bluetooth by pressing the [USER MEMORY] button [4] and [5] simultane- ously.(Same as [Bluetooth] button !9 [Bluetooth]button (THR30II Wireless only) Set the Bluetooth.
ORY] buttons [1], [3], and [5]. NOTICE All contents stored in the user memory will return to factory defaults when the unit is initialized. Hold down switches [1], [3], and [5]. Switch on the power. Reference Manual THR30II Wireless THR10II Wireless THR10II...
Make sure to follow the points at next page when connecting a computer to the THR-II USB jack, to avoid loss of data by the computer and prevent the THR-II from freezing or shutting down. Reference Manual THR30II Wireless THR10II Wireless THR10II...
The THR-II Wireless can operate on either DC power (via the power adaptor) or with the built‐in rechargeable battery. The THR10II can operate on DC power (via the power adaptor). * When you use THR-II Wireless with the built-in rechargeable battery, the output sound may become small.
Connect the supplied power adaptor to the DC IN jack located on the rear side of the THR-II Wireless. The LED of the power button lights in green while charging. * For further details of the Power Button LED state, refer to the THR30II Wireless, THR10II Wireless* Power Button LED status list (page 17).
Bluetooth button*. . Check that the LED (disconnect) is lit in green (connected). On the THR10II Wireless and THR10II, enable Bluetooth by pressing the [USER Playing an audio on MEMORY] button [4] and [5] simultane- the smart device. ously. NOTE •...
Page 11
• For connecting general android devices, refer to the Smart Device Connection Manual for Android. For connecting general iOS devices, refer to the iPhone/iPad Connection Manual. Yamaha Downloads. https://download.yamaha.com/ * Google Play and the Google Play logo are trademarks of Google LLC. Reference Manual THR30II Wireless THR10II Wireless THR10II...
• Edit effects and tone controls on the computer. Outputting audio files played on the computer with the THR-II Configuring and Operating Select the model name (THR30II WIRELESS, THR10II WIRELESS, THR10II) of the connected THR-II as the computer’s audio output setting. Windows Control Panel →...
Page 13
Connect the computer’s USB connector to the [USB] connector on the THR-II as shown in the diagram below. (See the USB Connection diagram on page 12.) Press the desired [USER MEMORY] button for 2 seconds to save the settings made with THR Remote to the THR-II’s built-in user memory (page Reference Manual THR30II Wireless THR10II Wireless THR10II...
• Make sure the [AUDIO] knob is turned up (see • Set the Tuner function OFF (see page page • Make sure the cable connecting the devices is not damaged. Reference Manual THR30II Wireless THR10II Wireless THR10II...
Page 15
• THR-II Wireless's built-in rechargeable battery may have reached the end of its life. If the prob- lem persists, consult your Yamaha dealer. • Charge the battery every six months to maintain the battery power function. • The built-in rechargeable battery has a limited life- time.
Digital Section Rated Output Built-in Amp Simulations THR30II Wireless: 30 W (15 W + 15 W) THR10II Wireless, THR10II: 20 W (10 W + 10 W) CLEAN, CRUNCH, LEAD, HI GAIN, SPECIAL, BASS, , FLAT Maximum output during built-in recharge-...
Specifications THR30II Wireless, THR10II Wireless* Power Button LED status list * Since the THR-10II does not have a built-in rechargeable battery, the power button LED status is only red (ON) and off (OFF). When not using the power adaptor...
Compressor Speaker Guitar In (FX1) Simulator Simulator Noise Delay Reverb Gate (FX2) (FX3) (FX4) GUITAR Knob Speakers & Sync Headphones Out AUX In Bluetooth In Extended Stereo AUDIO Knob USB In Variable gain Reference Manual THR30II Wireless THR10II Wireless THR10II...
Designed for acoustic-electric guitar, modeling the response of a boutique dynamic micro- Acoustic phone. A neutral tone with no amp or speaker modeling, and a slight mid scoop. Great for con- Flat necting other instruments to your THR. Reference Manual THR30II Wireless THR10II Wireless THR10II...
Need help?
Do you have a question about the THR10II and is the answer not in the manual?
Questions and answers