Installing The Software (Download) - Siemens SINAMICS V20 Manual
Simple speed control, using the uss protocol
Hide thumbs
Also See for SINAMICS V20:
- Operating instructions manual (426 pages) ,
- Getting started (66 pages) ,
- Compact operating instructions (34 pages)
Table of Contents
Advertisement
5 Installation and Commissioning
5.2 Installing the software (download)
5.2
Installing the software (download)
Table 5-2: Installing the software (download)
No.
1.
Make sure that
the hardware has been completely installed and wired (see chapter 5.1).
the 24 V DC power supply for the SIMATIC controller is switched on.
2.
Connect the SIMATIC S7 controller to your PG/PC via Industrial Ethernet.
3.
If you are using one of the supplied archives from Table 2-4, unzip it to a local directory of your
development system and open the respective TIA project:
V20USSatS7-1200
V20USSatS7-1500
If you are using your own project that has already been modified, open this project.
4.
Download PLC_1 to the CPU.
SINAMICS V20 at S7-1200/1500 via USS
Entry ID: 109480894,
V1.0,
General
SIMATIC S7-1200/1500
09/2018
Action
30
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SINAMICS V20 and is the answer not in the manual?
Questions and answers