Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for ekwb EK-Quantum Momentum Chipset Aorus X570
Summary of Contents for ekwb EK-Quantum Momentum Chipset Aorus X570
- Page 1 EK-Quantum Momentum Chipset Aorus X570 WATER BLOCK USER GUIDE...
- Page 2 The following instructions are subject to change without notice. Please visit our web site at www. ekwb.com for updates. Before installation of this product please read important notice, disclosure and warranty conditions printed on the back of the box.
-
Page 3: Table Of Contents
AMD X570 AORUS MASTER REMOVING FACTORY PROVIDED BACKPLATE REMOVING FACTORY PROVIDED CHIPSET COOLER APPLYING THERMAL COMPOUND PLACING EK-QUANTUM MOMENTUM CHIPSET AORUS X570 WATER BLOCK ON TO MOTHERBOARD ATTACHING BLOCK ON THE MOTHERBOARD ATTACHING THE FITTINGS REQUIRED TOOLS SUPPORT AND SERVICE... -
Page 4: Preparing Your Motherboard
PREPARING YOUR MOTHERBOARD AMD X570 AORUS ELITE, AMD X570 AORUS ULTRA REMOVING FACTORY PROVIDED CHIPSET COOLER There are four (4) screws on the back of the motherboard that needs to be removed. Do not forget to remove washers if present. Gently remove the chipset cooler and disconnect the Fan connection. -
Page 5: Amd X570 Aorus Master
AMD X570 AORUS MASTER REMOVING FACTORY PROVIDED BACKPLATE From the back side of the motherboard, remove five (5) screws using Phillips head screwdriver. After removing the mention screws also remove two (2) remaining screws from the front side of the motherboard using Phillips head screwdriver and take off the factory provided backplate. -
Page 6: Applying Thermal Compound
STEP 1: CLEANING THE CHIPSET Carefully remove the factory provided Thermal Pad from the chipset heat spreader. Clean the chipset heat spreader by using a non- abrasive cloth or q-tip. EKWB recommends the use of denatured alcohol for removing leftovers. STEP 1... -
Page 7: Placing Ek-Quantum Momentum Chipset Aorus X570 Water Block On To Motherboard
PLACING EK-QUANTUM MOMENTUM CHIPSET AORUS X570 WATER BLOCK ON TO MOTHERBOARD Place the EK-Quantum Momentum Chipset Aorus X570 to the motherboard or vice versa(as shown on the photo). Make sure that mounting holes are aligned. EK-Quantum Momentum Chipset Aorus X570... -
Page 8: Attaching The Fittings
ATTACHING THE FITTINGS EK recommends the use of EK-Fittings. When using fittings other than EK series please use hose clamps or appropriate substitute to secure the tubing to the barb. The use of biocide containing and corrosion inhibiting coolant is always recommended for any liquid Tubing cooling system. -
Page 9: Support And Service
SUPPORT AND SERVICE For assistance please contact: http://support.ekwb.com/ EKWB d.o.o. Pod lipami 18 1218 Komenda Slovenia - EU SOCIAL MEDIA EKWaterBlocks @EKWaterBlocks ekwaterblocks EKWBofficial ekwaterblocks...
Need help?
Do you have a question about the EK-Quantum Momentum Chipset Aorus X570 and is the answer not in the manual?
Questions and answers