Initialization Methods
The scanner can be initialized (returned to a fixed set of
conditions) in the following ways:
Hardware initialization:
Software initialization:
Operator initialization:
Safety Approvals
Safety standards:
EMC:
This scanner is initialized when turning the printer
power on. When scanner is initialized, following
action is performed.
a) Initializes scanner mechanism.
b) Clears input/output data buffer.
C) Sets default values.
The ESC @ command also initializes the printer.
When printer is initialized, following action is
performed.
a) Clears input/output data buffer.
b) Sets default values.
This scanner is recognized the INIT (negative pulse)
of parallel interface. When printer is initialized,
following action is performed.
a) Clears input/output data buffer.
b) Sets default values.
EN60950 (VDE)
EN 55022 (CISPR Pub. 22) class B
EN 50082-1
IEC 801-2
IEC 801-3
IEC 801-4
EN 61000-3-2
EN 61000-3-3
Product Specifications
B-11