Introduction - Toro 51948 Operator's Manual

Introduction

Thank you for purchasing a Toro product.
We would like for you to be completely satisfied with your new product, so feel free to contact a service dealer for help with
service, genuine Toro parts, or other information you may require.
Whenever you contact a service dealer, always know the item, serial and manufacturing numbers of the product. These num-
bers will help the service representative provide exact information about your specific product. You will find the item, serial
and manufacturing number decal located on the motor housing.
For your convenience, write the numbers in the space below.
Item No.
Serial No.
Manufacturing
No.
Label
Read this manual carefully to learn how to operate and maintain your product correctly. Reading this manual will help you
and others avoid personal injury and damage to the product. Although Toro designs, produces, and markets safe, state-of-the-
art products, you are responsible for using the product properly and safely. You are also responsible for training persons you
allow to use the product about safe operation.
The Toro warning system in this manual identifies potential hazards and has special safety messages that help you and others
avoid personal injury, even death. DANGER, WARNING, CAUTION and NOTICE are signal words that identify the level
of hazard. However, regardless of the hazard, be extremely careful. Two other words, "Important" and "Note," highlight
information.
4
Data
Introduction