Do you have a question about the Omnia S1 and is the answer not in the manual?
Questions and answers
Summary of Contents for NuPrime Omnia S1
Page 1
Omnia S1 Omnia S1 is purpose-built audio equipment that optimizes as a DLNA Server and Renderer. It has the added benefit of running native Android streaming apps. USER’S MANUAL...
Setting up the Omnia ..........................10 Admin Settings Web Page ........................13 Apps & Firmware Update ......................... 17 Using the Omnia S1 as Music Server ......................20 Using the Omnia S1 as Music Renderer ....................20 Using the Streaming Apps ........................20 NuPrime’s Limited Warranty and Limitation of Liabilities ................
FCC Notice - Declaration of Conformity Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Hereby, NuPrime Audio, Inc. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC. The manufacturer of this product is NuPrime Audio, Inc., 1712 Pioneer Ave. Ste 1817, Cheyenne, Wyoming 82001, USA.
SAFETY INSTRUCTIONS There are two categories of Safety Instructions included in this manual: • Product Warnings, (i.e., what must never be done to assure avoiding those hazards that • could cause bodily injury or property damage); and • User Directions (i.e., what must always be done to assure the safe use of your device). The Safety Instructions contained in this manual have been categorized in accordance with the seriousness of the potential hazards through the use of Signal Words.
Page 6
WARNING: Never attempt to disassemble, repair or make any modi cation to your device. Disassembly, modi cation or any attempt at repair could cause bodily injury or property damage, as well as damage to the device itself. WARNING: Your device is not a toy. Never allow children to play with your device. Misuse, rough or improper handling of your device by children could result in serious bodily injury for any of the enumerated safety warnings in this manual.
Page 7
Do not route the power cord where it will be crushed, pinched, bent, exposed to heat, or damaged in any way. Pay particular attention to the power cord at the plug and where the cord exits the back of the unit. The power cord should be unplugged from the wall outlet during a lightning storm or if the unit is to be left unused for a long period of time.
Introduction The Omnia S1 is a purpose-built audio equipment that performs both as a Server and a Renderer for your Digital Audio collection. The Server and Renderer are both DLNA/UPnP compatible, therefore allowing the flexibility of streaming music stored on the Omnia S1 to other DLNA/UPnP compatible renderers; and also streaming music from other DLNA/UPnP compatible servers to the Omnia S1.
Page 9
Specifications Refer to the above illustration from left to right: • AC socket • USB 3.0 port for hard disk and system upgrade use • Coaxial output (PCM up to 192kHz and DoP format DSD64) • Optical output (PCM up to 192kHz and DoP format DSD64) •...
Wired Connection (Ethernet) Connect the Omnia S1 to your network router using a LAN cable. By default, the Omnia will obtain an IP Address from your router via DHCP automatically. Power on the Omnia S1 via the rear switch and both the Omnia Server and Renderer should be visible under your network devices after a few minutes.
Page 12
For secured networks, you will be asked for the password. Enter the password using the onscreen keyboard (or optionally a USB keyboard connected to the Omnia S1) and the Omnia S1 should be connected to your wireless network.
Page 13
*Note that the Omnia S1 will take some time to perform a first time initialization. The boot up time will significantly reduce for subsequent power on. www.nuprimeaudio.com...
The Admin Settings Web Page can be accessed by any web browser that is on the same network as the Omnia S1. You will require the IP Address of the Omnia S1 on your network to enter into your browser’s...
Page 15
URL bar. Below is an example identifying the IP Address and accessing the Admin Settings Web Page with a Windows PC. The settings on this page allows you to perform the admin functions for the Omnia. www.nuprimeaudio.com...
Page 16
Server Name – Shows the current name of the Omnia Server that will appear in your UPnP browser/controller. Renderer Name – Shows the current name of the Omnia Renderer that will appear in your UPnP browser/controller. New Server Name – Change the name of the Omnia Server that appears in your UPnP browser/controller. To change, type in the new name in the text box and click on the ‘Change Server Name’...
Page 17
New Renderer Name – Change the name of the Omnia Server that appears in your UPnP browser/controller. To change, type in the new name in the text box and click on the ‘Change Server Name’ button. Restart DLNA Services – Click on the button to restart the Server and Renderer (if they become unresponsive to the controller).
Omnia S1 is a customized Android OS and hardware. Therefore, users are not permitted to install any App unless it is tested and released by NuPrime. Whenever an existing App has a new version or a new App is introduced, it will be uploaded to NuPrime website for the Check Update function to perform a series of steps to install the App.
Page 19
Click on ACCEPT to continue the installation. To prevent such prompts in the future, bring up the apps menu by clicking the icon on home screen and then click on Google Settings. Click on Security and then Google Play Protect. Turn off Scan device for security threats as shown in the screenshot below which will disable such prompts.
Page 20
Omnia S1 Firmware Update In the rare event that Omnia S1 operating system and firmware have to be updated, please visit the Omnia S1 product page download tab on NuPrimeAudio.com www.nuprimeaudio.com...
The Omnia S1 DLNA/UPnP Compatible Renderer is automatically started when the system powers on. In your preferred DLNA/UPnP software, choose the Omnia S1 as the renderer and you will be able to stream music from any DLNA/UPnP compatible server on the same network. Please refer to this section for the audio formats, bitrates and sample rates supported by the Renderer.
If a hardware defect exists and a valid claim is received within the Warranty Period, at its option and to the extent permitted by law, NuPrime will (1) repair the hardware defect at no charge, using new or refurbished replacement parts, (2) exchange the product with a product that is new or which has been manufactured from new or serviceable used parts and is at least functionally equivalent to the original product, or (3) refund the purchase price of the product.
Page 23
OBTAINING WARRANTY SERVICE If you purchased the product in the U.S., deliver the product, at your expense, to any NuPrime Service Center located in the U.S. If you purchased the product outside of the U.S., deliver the product to any NuPrime Authorized Importer in the country where you purchased the product.
Page 24
(f) to defects caused by normal wear and tear or otherwise due to the normal aging of the product; or (g) if any NuPrime serial number has been removed or defaced.
Page 25
THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME, GOODWILL, DAMAGE TO OR REPLACEMENT OF EQUIPMENT AND PROPERTY, ANY COSTS OF RECOVERING, REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH NUPRIME PRODUCTS, AND ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF DATA STORED ON THE PRODUCT. NUPRIME SPECIFICALLY DOES NOT REPRESENT THAT IT WILL BE ABLE TO REPAIR ANY PRODUCT UNDER THIS WARRANTY OR MAKE A PRODUCT EXCHANGE WITHOUT RISK TO OR LOSS OF PROGRAMS OR DATA.
Need help?
Do you have a question about the Omnia S1 and is the answer not in the manual?
Questions and answers