Renault ZOE 2020 Vehicle User Manual
  1. Manuals
  2. Brands
  3. Renault Manuals
  4. Automobile
  5. ZOE 2020
  6. Vehicle user manual

Renault ZOE 2020 Vehicle User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Renault ZOE
Vehicle user manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ZOE 2020 and is the answer not in the manual?

Questions and answers

Related Manuals for Renault ZOE 2020

Summary of Contents for Renault ZOE 2020

  • Page 1 Renault ZOE Vehicle user manual...
  • Page 3 Welcome to your new electric vehicle This driver’s handbook contains the information necessary: – for you to familiarise yourself with your vehicle, to use it to its best advantage and to benefit fully from the all the functions and the technical developments it incorporates. –...
  • Page 4 ExTErior Rear view mirrors ➥ 1.67 Electric windows ➥ 3.15 Windscreen wipers ➥ 1.103 and ➥ 1.108 Demisting ➥ 3.4 and ➥ 3.7 Charging ➥ 1.8 Map ➥ 1.20 Locking/unlocking the doors ➥ 1.30 Bodywork maintenance ➥ 4.9 Lights: operation ➥ 1.96 Tyres ➥...

  • Page 5: Passenger Compartment

    PassEngEr comParTmEnT Adjusting your driving po- Passenger compartment storage/fit- sition ➥ 1.36 tings ➥ 3.18 Rear bench seat ➥ 3.23 Rear headrests ➥ 3.22 Front seats ➥ 1.34 Child safety ➥ 1.50 Transporting objects in the lug- gage compartment ➥ 3.27...
  • Page 6 DrivEr’s PosiTion Instrument panel ➥ 1.72 Trip computer controls ➥ 1.78 Multimedia screen ➥ 3.28 E x t e r i o r l i g h t i n g ➥ 1.96 Heated seat(s) ➥ 1.34 Heating/Air conditioning Cruise control ➥ 2.55 system ➥...

  • Page 7: Driving Aids

    Driving aiDs ABS (anti-lock braking system) ESC (electronic stability program) Braking assistance Speed limiter ➥ 2.51 Hill start assistance ➥ 2.28 Cruise control ➥ 2.55 Lane departure warning ➥ 2.33 Detection of road signs ➥ 2.47 Lane Keeping Assist ➥ 2.37 Active emergency braking...
  • Page 8 safETy on boarD Front Airbags ➥ 1.41 Deactivating the passen- ger’s front airbag ➥ 1.64 Side Airbags ➥ 1.48 Seat belts ➥ 1.36...
  • Page 9 iDEnTifying a vEhiclE - labEls Review of a vehicle identification number ➥ 6.2 Vehicle identification plate ➥ 6.2 Engine identification plate ➥ 6.3 Tyre pressure labels ➥ 2.18 ➥ 4.8...
  • Page 10 ThE EnginE comParTmEnT (routine maintenance) 400 V electric circuits ➥ 1.2 Brake fluid ➥ 4.4 Battery ➥ 4.6 Windscreen washer fluid ➥ 4.4 Coolant level ➥ 4.4 Opening bonnet ➥ 4.2...
  • Page 11 brEakDown rEcovEry Replacing windscreen wiper blade(s) ➥ 5.21 Puncture ➥ 5.3 Tools ➥ 5.2 Replacing headlight bulbs ➥ 5.10 Front towing point ➥ 5.23 Replacing rear screen wiper blade ➥ 5.21 Fuses ➥ 5.17 Replacing rear light bulbs ➥ 5.11...
  • Page 12 0.10...
  • Page 13 sections getting to know your vehicle ....... Driving ..............your comfort ............maintenance ............Practical advice ............ Technical specifications ........alphabetical index ..........0.11...
  • Page 14 0.12...

  • Page 15: Tings ➥

    Section 1: Getting to know your vehicle Electric vehicle: introduction ............Important recommendations .
  • Page 16 ElEcTric vEhiclE: introduction (1/5) 1 Electric charging connection 2 Electric motor 3 Secondary 12V battery 4 400 V traction battery 5 Orange electrical power cables...

  • Page 17: Charging ➥

    ElEcTric vEhiclE: introduction (2/5) Electric vehicles have special features, but operate in a similar manner to con- ventional vehicles. The main difference in electric vehicles is the exclusive use of electric energy instead of fuel, as used in convention vehicles. We therefore recommend that you read these instructions describing your elec- tric vehicle carefully.
  • Page 18 ElEcTric vEhiclE: introduction (3/5) batteries 400 v traction battery secondary 12v battery This battery stores the energy neces- The second battery on your vehicle is Your electric vehicle has two types of sary to operate the motor in your elec- a secondary 12 V battery: this supplies battery: tric vehicle properly.
  • Page 19 ElEcTric vEhiclE: introduction (4/5) The vehicle drive system in an electric vehicle uses a direct voltage of approxi- mately 400 volts. This system can get hot during and after switching off the ignition. Respect warning messages given 400 volt electrical circuit The A symbol denotes the electrical on the labels in the vehicle.
  • Page 20 ElEcTric vEhiclE: introduction (5/5) Driving noise Bad weather, flooded roads: As with a car with an automatic gear- Electric vehicles are particularly quiet. Do not drive through floods box, you will have to get used to not You will not yet necessarily be used to if the depth of water is using your left foot, and not using this it, and neither will other road users.

  • Page 21: Important Recommendations

    imPorTanT rEcommEnDaTions Please read these instructions carefully. Failure to follow these instructions may lead to a risk of fire, serious injury or electric shock which may present a risk to life. in the event of an accident or impact In the event of an accident or an impact to the underside of the vehicle (e.g.: striking a post, raised kerb or other street furni- ture), this may damage the electric circuit or the traction battery.
  • Page 22 ElEcTric vEhiclE: charging (1/10) charging schematic diagram 1 Electric charging connection 2 Charging cord 3 Specific wall socket or recharging ter- minal If you have any questions regarding the equipment needed for charging, please ask an authorised dealer.
  • Page 23 ElEcTric vEhiclE: charging (2/10) important recommendations for charging your vehicle Please read these instructions carefully. Failure to follow these instructions may lead to a risk of fire, serious injury or electric shocks which could result in death. charging Do not do anything to the vehicle during charging (washing, working in the engine compartment, etc.). In the event of the presence of water, signs of corrosion or foreign bodies in the charging cord connector or in the vehicle charg- ing socket, do not charge the vehicle.
  • Page 24 ElEcTric vEhiclE: charging (3/10) charging cord A charging cord B Always read the charging cord instruc- tions carefully before using it B. This lead is specific to your vehicle and This cord allows: designed for connecting to wall sockets – standard charge, on a socket used or public terminals to enable standard only for the vehicle (14A / 16A charging of the traction battery.
  • Page 25 ElEcTric vEhiclE: charging (4/10) important recommendations for charging your vehicle Please read these instructions carefully. Failure to follow these instructions may lead to a risk of fire, serious injury or electric shocks which could result in death. choice of charging cord The standard charging cords supplied with the vehicle have been designed specifically for this vehicle.
  • Page 26 ElEcTric vEhiclE: charging (5/10) The vehicle has two charging connec- When the vehicle is parked for more tions located at the front of the vehicle: than three months with near zero – E socket for charging up to 22 kW; charge, charging the battery can –...
  • Page 27 ElEcTric vEhiclE: charging (6/10) The charging cord is automatically locked with the vehicle. This will make it impossible to unplug the cord from your vehicle. recharging the traction – open valve 7; battery – plug in the end of the cord to the vehicle stationary, ignition off: power supply;...
  • Page 28 ElEcTric vEhiclE: charging (7/10) The display on the instrument panel disappears after a few seconds. It reap- pears on the instrument panel when a door is opened. One charging is complete, the Z.E. 6 warning light illuminates continuously in green. You do not need to wait until the charge is at reserve levels to recharge your ve- hicle.
  • Page 29 ElEcTric vEhiclE: charging (8/10) note: immediately after a long charge of the traction battery, the cable may be hot. Please use the handles. Precautions to take when removing – unplug the charging cord from the from the socket vehicle; – the valve 7 must be closed; –...
  • Page 30 ElEcTric vEhiclE: charging (9/10) label 11 – do not wash the charging flap using a high-pressure water jet; The label 11 on the charging flap re- – open the flap to connect the charging minds you of the instructions for the lead;...
  • Page 31 ElEcTric vEhiclE: charging (10/10) label 12 label 13 – illuminated continuously in green: the vehicle is fully charged; The 12 label located on the charging The 13 label located on the charging – flashing in red: operating fault. provides information on the charging flap provides a reminder that you can operation according to the status of always unlock the vehicle charging...
  • Page 32 ElEcTric vEhiclE: charging programming (1/2) Program Program Postponed Program Immediate Program Immediate Postponed charge charging charge charging Edit Edit Edit Edit Charging will start at 12:34 Charging will begin when the vehicle is plugged in Charge Calendar Charge Climate Calendar Climate charging programming “immediate charging”...
  • Page 33 ElEcTric vEhiclE: charging programming (2/2) Program Charging programming EV programming Charging programme 1 Start at End at Immediate Postponed Program 12:34 PM -> 12:24 AM L M M J V S D charge charging Edit Edit Charging programme 2 L M M J V S D 10:00 PM ->...

  • Page 34: Battery Life

    carDs: general information (1/2) The card is used for: card operating range – locking/unlocking the opening ele- This varies according to the environ- ments (doors, boot); ment: take care not to accidentally lock – unlocking the charging cable ➥ 1.8 ; or unlock the vehicle by inadvertently –...
  • Page 35 carDs: general information (2/2) interference Interference by factors in the immediate vicinity (external installations or the use of equipment operating on the same frequency as the remote control) may affect the operation of the remote con- trol. advice Driver’s responsibility Avoid leaving the card in hot, cold or when parking or stopping humid areas.
  • Page 36 “hanDs-frEE” carD: use (1/5) Deactivating/activating the “hands-free” mode Depending on the vehicle, you can de- activate/activate: – unlocking when approaching and locking when moving away from the vehicle; – locking and unlocking by pressing on Driver’s responsibility the buttons on the door handle. when parking or stopping You can also disable/activate the sound the vehicle...
  • Page 37 “hanDs-frEE” carD: use (2/5) Unlocking in “hands-free” remote “hands-free” locking Depending on the equipment level, the door mirrors fold in automatically to mode, when approaching With the card on you, doors and lug- confirm locking. and moving away from the gage compartment door closed, move If the card has been within the detec- vehicle...
  • Page 38 “hanDs-frEE” carD: use (3/5) special features of the unlocking system After three days not in use, approach unlocking is disabled. Press the 2 button (on the door or luggage com- partment handle) or remote control to unlock the vehicle and re-activate the mode.
  • Page 39 “hanDs-frEE” carD: use (4/5) locking using the card With the doors and boot closed, press button 5: the vehicle locks. To indicate that the vehicle has been locked, the hazard warning lights flash twice and then light up for approxi- mately four seconds.
  • Page 40 “hanDs-frEE” carD: use (5/5) Unlocking the charging cord Press button 7 to unlock the charging cable from the vehicle. Driver’s responsibility when parking or stopping the vehicle Never leave an animal, child or adult who is not self-suffi- cient alone in your vehicle, even for a short time.
  • Page 41 carD: deadlocking To deactivate deadlocking Unlock the vehicle using button 1 on the card. The hazard warning lights flash once to indicate that the doors have been un- locked. To activate deadlocking If the vehicle is equipped with a dead- locking function, this allows you to lock Deadlocking can be activated in one of the opening elements and to prevent...

  • Page 42: Opening And Closing The Doors

    oPEning anD closing ThE Doors (1/2) opening the doors from the opening from the inside rear doors outside With the doors unlocked: Pull handle 5. – press on recess 3 to move the front doors handle 4; lights-on reminder buzzer With the doors unlocked, pull handle 1.

  • Page 43: Child Safety

    oPEning anD closing ThE Doors (2/2) Driver’s responsibility when parking or stopping the vehicle Never leave an animal, child or adult who is not self-suffi- cient alone on your vehicle, even for a short time. They may pose a risk to themselves or to others by starting the engine, activating equipment such as the electric windows or by locking the...
  • Page 44 locking, Unlocking ThE Doors (1/3) if the card does not work: in certain cases, the card may not work: – when the card battery is drained, flat battery, etc. – due to the use of electronic devices near to the remote control (e.g. mobile telephone);...
  • Page 45 locking, Unlocking ThE Doors (2/3) locking the doors manually Using the key integrated in the card Insert the key 2 into the lock of the front Turn screw 3 with the door open (using left-hand door and lock or unlock. the end of the key) and close the door.
  • Page 46 locking, Unlocking ThE Doors (3/3) Door and tailgate status locking the doors without indicator the card when the ignition is on, the indicator For example, in the event of a dis- light above the 4 switch informs you of charged battery or the card temporarily the locking status of the opening ele- not working, etc.

  • Page 47: Automatic Locking When Driving

    aUTomaTic locking whEn Driving activating/deactivating the operating faults function If you experience an operating fault (no automatic locking, the indicator with the engine running, press the light incorporated in button 1 does not button 1 for approximately 5 seconds, light up when trying to lock the open- until you hear a warning beep.
  • Page 48 fronT sEaTs (1/2) To tilt the seatback Turn control knob 3 to the required po- sition. To move the seat forwards or To adjust the lumbar support back on the driver’s seat (depending on vehicle) Lift handle 1 to unlock. Release the For safety reasons, carry handle once the seat is in the correct Lower handle 2 to increase the support...

  • Page 49: Heated Seats

    fronT sEaTs (2/2) operating faults When an operating fault is detected, the warning lights in the 4 switch for the seat concerned switch off after approxi- mately five seconds. Consult an approved dealer. heated seats With the ignition on: – Pressing the switch 4 on the re- quired seat for the first time activates the heating system on high.
  • Page 50 sEaT bElTs (1/5) Always wear your seat belt when trav- before starting, first adjust your driv- elling in your vehicle. You must also ing position, then ask all occupants to adjust their seat belts to ensure comply with the legislation of the par- ticular country you are in.
  • Page 51 sEaT bElTs (2/5) ™ locking front seat belt reminder warning light on display 6 Unwind the belt slowly and smoothly It lights up when the engine is started and ensure that buckle 3 locks into and, if the driver’s seat belt is not fas- catch 5 (check that it is locked by pull- tened, the light flashes and a beep ing on buckle 3).
  • Page 52 sEaT bElTs (3/5) adjusting the height of the rear seat belt reminder (depending In all cases, check that the rear pas- on vehicle) sengers are wearing seat belts and that front seat belts ß the number of seat belts shown as fas- The warning light appears on Press the button 8 to adjust the seat...
  • Page 53 sEaT bElTs (4/5) rear side seat belts 9 rear centre seat belt Fasten sliding buckle 12 into the corre- sponding red catch 14. The belts are locked, unlocked and Unwind belt 10 slowly from its housing, adjusted in the same way as the front then fasten buckle 11 into the corre- belts.
  • Page 54 sEaT bElTs (5/5) The following information applies to the vehicle’s front and rear seat belts. – No modification may be made to the component parts of the originally fitted restraint system: seat belts, seats and their mountings. For special operations (e.g. fitting child seats), contact an authorised dealer. –...

  • Page 55: Methods Of Restraint In Addition To The Front Seat Belts

    mEThoDs of rEsTrainT in aDDiTion To ThE fronT sEaT bElTs (1/6) They are comprised of: – Have the entire restraint – seat belt inertia reel pretension- system checked following ers; an accident. – chest-level load limiters; – No operation whatso- –...
  • Page 56 mEThoDs of rEsTrainT in aDDiTion To ThE fronT sEaT bElTs (2/6) load limiter Driver and passenger front airbag Above a certain severity of impact, this mechanism is used to limit the force of Fitted to the driver and passenger side. the belt against the body so that it is at The presence of this equipment is indi- an acceptable level.
  • Page 57 mEThoDs of rEsTrainT in aDDiTion To ThE fronT sEaT bElTs (3/6) operating faults å This warning light will light up on the instrument panel when the igni- tion is switched on and then go out after a few seconds. If it does not light up when the ignition is switched on, or comes on when the engine is running, there is a fault in the system.
  • Page 58 mEThoDs of rEsTrainT in aDDiTion To ThE fronT sEaT bElTs (4/6) The following conditions will trigger in a frontal impact with another vehi- in a side impact with another vehicle the pretensioners or airbags. cle of an equivalent or higher category, of an equivalent or higher category, at with an impact area equal to or greater an impact speed equal to or greater...
  • Page 59 mEThoDs of rEsTrainT in aDDiTion To ThE fronT sEaT bElTs (5/6) in the following examples, the pre- in the following examples, the pre- – side impact, affecting the front of the tensioners or the airbags could op- tensioners or airbags might not op- vehicle;...
  • Page 60 mEThoDs of rEsTrainT in aDDiTion To ThE fronT sEaT bElTs (6/6) all of the warnings below are given so that the airbag is not obstructed in any way when it is inflated and also to prevent the risk of serious injuries caused by items which may be dislodged when it inflates. warnings concerning the driver’s airbag –...
  • Page 61 mEThoDs of rEsTrainT in aDDiTion To ThE rEar siDE sEaT bElTs force limiter Above a certain severity of impact, this mechanism is used to limit the force of the belt against the body so that it is at an acceptable level. –...

  • Page 62: Side Protection Devices

    siDE ProTEcTion DEvicEs side Airbags This airbag is fitted to the front seats, activated at the sides of the seats (door side) to protect the occupants in the event of a severe side impact. warning relating to the side airbag –...

  • Page 63: Additional Methods Of Restraint

    aDDiTional mEThoDs of rEsTrainT all of the warnings below are given so that the airbag is not obstructed in any way when it is inflated and also to prevent the risk of serious injuries caused by items which may be dislodged when it inflates. The airbag is designed to complement the action of the seat belt.
  • Page 64 chilD safETy: general information (1/2) carrying children Please ensure that you comply with the legislation of your country. Children, and adults, must be correctly seated and strapped in for all journeys. The children being carried in your vehi- cle are your responsibility. Driver’s responsibility A child is not a miniature adult.
  • Page 65 chilD safETy: general information (2/2) Using a child seat Set a good example by always fas- The level of protection offered by the tening your seat belt and teaching child seat depends on its ability to re- your child: strain your child and on its installation. –...
  • Page 66 chilD safETy: choosing a child seat rear-facing child seats forward-facing child seats booster cushions A baby’s head is, proportionally, heavier The child’s head and abdomen need to From 15 kg or 4 years, the child can than that of an adult and its neck is very be protected as a priority.
  • Page 67 chilD safETy: choosing a child seat mounting (1/3) There are two ways of attaching child attachment via the seat belt seats: via the seat belt or using the The seat belt must be adjusted to ISOFIX system. ensure that it is effective in the event of harsh braking or an impact.
  • Page 68 chilD safETy: choosing a child seat mounting (2/3) attachment using the isofix Attach the child seat with the ISOFIX system locks, if these are provided. The ISOFIX system allows quick, easy, safe fitting. Authorised ISOFIX child seats are ap- proved in accordance with regulation The ISOFIX system consists of 2 rings ECE-R44 in one of the three following and, in some cases, a third ring.
  • Page 69 chilD safETy: choosing a child seat mounting (3/3) The third ring is used to attach the Pull the belt so that the back of the child upper strap on some child seats: you seat comes into contact with the back must attach hook 2 to ring 3 for a rear of the vehicle seat.
  • Page 70 chilD safETy: fitting a child seat: general information (1/2) Some seats are not suitable for fitting in the front seat child seats. The diagram on the follow- The laws concerning children travel- ing page shows you how to attach a ling in the front passenger seat differ in child seat.
  • Page 71 chilD safETy: fitting a child seat: general information (2/2) in the rear side seat rear centre seat A carrycot can be installed across the Check that the belt is suitable for se- vehicle and will take up at least two curing your child seat.
  • Page 72 chilD sEaTs: attachment by seat belt (1/3) The table below summarises the information already shown on the diagram on the previous page, to ensure the regula- tions in force are respected. five-seater version front passenger seat rear side rear centre Type of child seat weight of the child without airbag...
  • Page 73 chilD sEaTs: attachment by seat belt (2/3) x = Seat not suitable for fitting child seats of this type. U = Seat which allows a child seat with “Universal” approval to be installed using a seat belt; check that it can be fitted. (2) A carrycot can be installed across the vehicle and will take up at least two seats.
  • Page 74 chilD sEaTs: attachment by seat belt (3/3) ³ Check the status of the airbag before fitting a child seat or allowing a passenger to use the seat. ² Seat not suitable for fitting child seats. child seat attached using the belt ¬...
  • Page 75 chilD sEaTs: attachment using the isofix system (1/3) child seat fitted using the isofix mounting ü Seat which allows an ISOFIX child seat to be fitted. ± The rear seats are fitted with an anchorage point which allows a forward-facing ISOFIX child seat with universal approval to be attached.
  • Page 76 chilD sEaTs: attachment using the isofix system (2/3) The table below summarises the information already shown on the diagram on the previous page, to ensure the regula- tions in force are respected. front passenger seat rear centre rear side seat seats weight of seat size...
  • Page 77 chilD sEaTs: attachment using the isofix system (3/3) x = Seat not suitable for fitting child seats. U = Seat which allows a child seat with “Universal” approval to be installed using a seat belt; check that it can be fitted. iUf/il = On equipped vehicles, seat which allows an approved “Universal/semi-universal”...

  • Page 78: Passenger Airbag

    chilD safETy: deactivating, activating the front passenger airbag (1/3) Deactivating the front To deactivate the airbag: with the vehicle stationary and the ignition passenger airbag switched off,push and turn lock 1 to Before installing a child seat on the the off position. front passenger seat: With the ignition on, you must check The passenger airbag must...
  • Page 79 chilD safETy: deactivating, activating the front passenger airbag (2/3) The markings on the dashboard and labels A on each side of the passen- ger sun visor 3 (example: label shown above) remind you of these instruc- tions. DangEr Since operation of the front passenger airbag is not compatible with the po- sition of a rear-facing child seat,...
  • Page 80 chilD safETy: deactivating, activating the front passenger airbag (3/3) DangEr Since operation of the front passenger airbag is not compatible with the po- sition of a rear-facing child seat, nEvEr fit a rear-facing child re- straint system in a seat protected by an ACTIVATED front airbag.

  • Page 81: Rear View Mirrors

    rEar viEw mirrors heated door mirrors When the engine is started, mirror de- icing is activated with the rear screen de-icing/demisting. folding door mirrors The door mirrors will fold-out automati- cally when the vehicle is unlocked. The door mirrors fold in when the vehicle is locked.
  • Page 82 Driving PosiTion: lEfT-hanD DrivE (1/2) 1.68...
  • Page 83 Driving PosiTion: lEfT-hanD DrivE (2/2) The equipment fitted, described below, DEPEnDs on ThE vErsion anD coUnTry. 1 Side air vent. 10 Multimedia or radio screen. 19 Controls for: – activating/deactivating the elec- 2 Stalk: 11 Controls for: tronic parking brake; –...
  • Page 84 Driving PosiTion: righT-hanD DrivE (1/2) 1.70...
  • Page 85 Driving PosiTion: righT-hanD DrivE (2/2) The equipment fitted, described below, DEPEnDs on ThE vErsion anD coUnTry. 1 Side air vent. 11 Steering wheel, driver’s airbag loca- 16 Controls for: tion, horn. – on-board computer information 2 Speakers. read-out and vehicle settings 12 Instrument panel.
  • Page 86 warning lighTs (1/3) The presence and operation of the warning lights DEPEnD on ThE EQUiPmEnT anD coUnTry. å indicator lightairbag In some cases, the appearance of a warning light is accompanied by a mes- This comes on when the igni- sage.
  • Page 87 warning lighTs (2/3) The presence and operation of the warning lights DEPEnD on ThE EQUiPmEnT anD coUnTry. sToP light warning light variable power-assisted ®  This lights up when the ignition If it appears in red during driv- steering warning light ®...
  • Page 88 warning lighTs (3/3) The presence and operation of the warning lights DEPEnD on ThE EQUiPmEnT anD coUnTry.   anti-lock braking warning Electrotechnical system warning light for the elec- light warning light tronic stability program (Esc) and traction control system This lights up when the ignition is If it lights up while driving, this means There are several reasons for the warn-...

  • Page 89: Multimedia Screen ➥

    DisPlays anD inDicaTors (1/3) instrument panel A overspeed buzzer message indicating vehicle ready Depending on the vehicle and country, for driving 3 lights up when the driver’s door is  The rEaDy message appears when opened. In some cases, the appear- warning light is displayed the engine starts and disappears when ance of a warning light is accompanied...
  • Page 90 DisPlays anD inDicaTors (2/3) reserve threshold When the traction battery charge reaches approximately 7% or, depend- ing on the vehicle, approximately 12%,  the gauge and indicator light 9 appear in yellow, accompanied by a beep. To optimise your range ➥ 2.16. immobilisation threshold imminent When the charge level reaches 4.5% or, depending on the vehicle, approxi-...
  • Page 91 DisPlays anD inDicaTors (3/3) instrument panel in miles vehicles fitted with a multimedia screen. (option to switch to km/h) With the vehicle stationary and the vehicles not fitted with a multimedia engine running, from the multimedia screen screen, select the “Settings” menu, the –...
  • Page 92 TriP comPUTEr: general information (1/2) Press the 1 switch to browse between menus and select functions by repeat- edly pressing switch 2 or 3, then if nec- essary use the 4 switch to confirm “OK”. from the vehicle tab: a) journey settings: –...
  • Page 93 TriP comPUTEr: general information (2/2) reading energy consumption manual reset Select one of the trip settings, press and values hold switch 4 OK to reset the range. Some vehicle equipment items con- sume energy: the energy consumed automatic reset by the vehicle may therefore differ from The range is automatically reset at the the energy consumed on the electric end of a full recharge of the traction...
  • Page 94 TriP comPUTEr anD warning sysTEm: journey parameters (1/4) The display of information shown below DEPEnDs on ThE vEhiclE EQUiPmEnT anD coUnTry. Examples of selections interpreting the display selected Consumption a) Trip settings. current energy consumption. + 42 average energy consumption. The value is displayed after having travelled at least 400 metres since the last reset.
  • Page 95 TriP comPUTEr anD warning sysTEm: journey parameters (2/4) The display of information shown below DEPEnDs on ThE vEhiclE EQUiPmEnT anD coUnTry. Examples of selections interpreting the display selected b) Tyre pressure reset ➥ 2.18 Tyre pressure 12:00 c) clock 1.81...
  • Page 96 TriP comPUTEr anD warning sysTEm: journey parameters (3/4) The display of information shown below DEPEnDs on ThE vEhiclE EQUiPmEnT anD coUnTry. Examples of selections interpreting the display selected d) service interval. Service in Distance remaining until the next service (displayed in miles/kilome- tres), then when the service nears, several scenarios are possible: 1,210 miles –...
  • Page 97 TriP comPUTEr anD warning sysTEm: journey parameters (4/4) The display of information shown below DEPEnDs on ThE vEhiclE EQUiPmEnT anD coUnTry. Examples of selections interpreting the display selected Settings e) vehicle settings personalisation menu ➥ 1.87. (OK) f) Trip log. Tailgate open Successive display: –...
  • Page 98 TriP comPUTEr anD warning sysTEm: information messages These can help in the vehicle starting phase, or give information about a selection or a driving status. Examples of information messages are given in the following pages. Examples of messages interpreting the display selected “Disconnect cable to start”...
  • Page 99 TriP comPUTEr anD warning sysTEm: operating fault messages © These appear with the warning light and mean that you should drive very carefully to an authorised dealer as soon as possible. if you fail to follow this recommendation, you risk damaging your vehicle. ©...
  • Page 100 TriP comPUTEr anD warning sysTEm: warning message ® These appear with the warning light and require you to stop immediately, for your own safety, as soon as traffic conditions allow. stop your engine and do not restart it. call an approved Dealer. Examples of warning messages are given in the following pages.

  • Page 101: Vehicle Settings Customisation Menu

    vEhiclE sETTings cUsTomisaTion mEnU (1/3) adjusting the settings d) “Welcome”: – External welcome; Select a tab then the function to be – Automatic fold-out of mirrors; modified (the display depends on the – Interior welcome; vehicle equipment and country): – Courtesy light auto mode. a) “Driving”: Depending on the function, select: –...
  • Page 102 vEhiclE sETTings cUsTomisaTion mEnU (2/3) adjusting the settings d) “DRIVING ASSIST”: – Lane departure warning sound Navigate using the 4 or 5 control to volume; select the function to be modified and – Lane departure warning sensitiv- press 6 “OK” to confirm (display may ity;...
  • Page 103 vEhiclE sETTings cUsTomisaTion mEnU (3/3) To exit the menu, press 4 or 5 to access “BACK” and confirm by pressing 6 “OK”. It may be necessary to carry out this operation more than once. Once a line has been selected, press 6 “OK"...

  • Page 104: Clock And Exterior Temperature

    clock anD ExTErior TEmPEraTUrE (1/2) 9°C 12:00 setting the time Set the hour using control 2 or 3, then vehicles fitted with a multimedia press switch 4 OK to confirm. screen vehicles not fitted with a multimedia Set the minutes using control 2 or 3, The time and exterior temperature are screen then press switch 4 “OK”...
  • Page 105 clock anD ExTErior TEmPEraTUrE (2/2) External temperature indicator If the power supply is cut (battery special note: disconnected, supply wire cut, etc.), the clock must be reset. When the outside temperature is – 3°C to + 3°C, the °C characters flash (sig- We recommend that you do not nalling a risk of ice on the road).

  • Page 106: Steering Wheel Heating

    sTEEring whEEl (1/2) activating the function With the ignition on, press switch 3, the indicator light in the switch lights up. Deactivating the function - automatic: The function switches off automatically after the regulation phase of approxi- mately 30 minutes. The indicator light in switch 3 goes out.
  • Page 107 sTEEring whEEl (2/2) Power-assisted steering The variable power-assisted steering system is equipped with an electronic control system which alters the level of assistance to suit the vehicle speed. Steering is made easier during parking manoeuvres (for added comfort) while the force needed to steer increases progressively as the speed rises (for enhanced safety at high speeds).

  • Page 108: Audible And Visual Signals

    aUDiblE anD visUal signals Direction indicators Move stalk 1 parallel to the steering wheel and in the direction you are going to turn it. one-touch mode When driving, it is possible that the steering wheel may not be turned suf- ficiently to return the stalk automatically to its starting position.

  • Page 109: Activating The System

    PEDEsTrian horn warning noise selection Electric vehicles are particularly quiet. This system enables you to warn – Keep the switch 1 depressed. people of your presence – especially The various sounds will be played in pedestrians and cyclists. succession; The system is activated automatically –...
  • Page 110 ExTErior lighTing anD signals (1/6) Dipped beam headlights manual operation Turn the ring 2 until the symbol is oppo- site mark 3. This indicator light on the instrument panel comes on. automatic operation (depending on vehicle) Turn ring 2 until the AUTO symbol is op- posite mark 3: with the engine running, the dipped beam headlights switch on or off automatically depending on the...

  • Page 111: System ➥

    ExTErior lighTing anD signals (2/6) During deactivation of the main beam The main beam headlights come on au- headlights, the dipped beam headlights tomatically if: return to their original position. – exterior light is weak; – no other vehicles or lighting are de- tected;...
  • Page 112 ExTErior lighTing anD signals (3/6) operating faults When the message “Check Automatic Lighting” appears on the instrument panel, the system is deactivated. Consult an approved dealer. Using the portable naviga- tion system at night in the windscreen area below the ...
  • Page 113 ExTErior lighTing anD signals (4/6) lights-on reminder buzzer welcome and goodbye function If the lights are on after the engine is (depending on the vehicle) switched off, a warning beep sounds when the driver’s door is opened to Once the function is activated, the day- warn you that the lights are still on.
  • Page 114 ExTErior lighTing anD signals (5/6) with the engine lights switched off, the 2 ring in AUTO, pull the lever 1 to- wards you: the side lights and dipped beam headlights will switch on for ap- proximately 30 seconds along with the š...

  • Page 115: Sition ➥

    ExTErior lighTing anD signals (6/6)  rear fog light switching off the lights Turn centre ring 4 on the stalk Turn the centre ring 4 again until mark 3 until the symbol faces mark 3, then re- is opposite the symbol for the fog lights lease it.

  • Page 116: Headlight Beam Adjustment

    hEaDlighT bEam aDJUsTmEnT Examples of positions for adjusting control A according to the load Driver alone or with front passenger all seats occupied Driver with passengers and luggage Switch A is used to adjust the height of (or load) reaching the maximum the headlight beams according to the permissible all-up weight load.
  • Page 117 winDscrEEn wash, wiPE (1/5) vehicle fitted with intermittent special note windscreen wipers when driving the vehicle, the wiping speed slows down whenever the ve- A single sweep hicle stops. For example, fast wiping A short push will trigger one sweep speed will slow to normal wiping speed.
  • Page 118 winDscrEEn wash, wiPE (2/5) When activating automatic wiping or when increasing sensitivity, one sweep of the blades is performed. note: – the rain sensor is only intended as a driving aid. In the event of reduced visibility, the driver should manually activate the wipers.
  • Page 119 winDscrEEn wash, wiPE (3/5) operating faults special note In the event of a malfunction of the au- when driving the vehicle, the wiping tomatic wiping, the wiper is set to inter- speed slows down whenever the vehi- mittent wiping. Contact an authorised cle stops.

  • Page 120: Service Position

    winDscrEEn wash, wiPE (4/5) specific front wiper position (service position) This position enables the blades to be lifted to remove them from the winds- creen. This can be useful: – to clean the blades; – to release the blades from the winds- creen in winter;...
  • Page 121 winDscrEEn wash, wiPE (5/5) note: in temperatures below zero, the washer liquid may freeze on the wind- screen, reducing visibility. Heat the windscreen using the demister control before cleaning. Efficiency of a wiper blade Check the condition of the wiper blades.

  • Page 122: Rear Screen Wiper

    rEar scrEEn wash, wiPE (1/2) To stop the operation, pivot ring 3 again. note: when washing using a roller type car wash, return the ring 3 on the stalk 1 to the stop position to deactivate automatic wiping. Follow usage recommendations. Efficiency of a wiper blade Check the condition of the wiper blades.
  • Page 123 rEar scrEEn wash, wiPE (2/2) activation/deactivation of the rear In the event of obstacles present on the screen wiper rear window (dirt, snow, etc.), the wiper will try to sweep away all the obstacles. Engaging reverse gear triggers inter- If an obstacle prevents the blade from mittent wiping (if the front wipers are in moving, it can be stopped.
  • Page 124 1.110...

  • Page 125: Ment ➥

    Section 2: Driving (Advice on use relating to fuel economy and the environment) Starting, stopping the engine ............Gear control .
  • Page 126 sTarTing, sToPPing ThE EnginE (1/3) starting the engine special features – If one of the starting conditions is not The card must be inserted in detection applied, the message “Press Brake zone 1. + START” is displayed on the instru- To start ment panel;...
  • Page 127 sTarTing, sToPPing ThE EnginE (2/3) operating faults In certain cases, the hands-free card may not work: – the card battery is drained, flat 12 V battery, etc. – near to appliances operating on the same frequency as the card (moni- Driver’s responsibility tor, mobile phone, video game, etc.);...

  • Page 128: Stopping The Engine

    sTarTing, sToPPing ThE EnginE (3/3) If the card is no longer in the passenger compartment when you try to switch the engine off, the message “card missing: press and hold” appears on the instru- ment panel: press the 2 button for at least two seconds.

  • Page 129: Instrument Panel ➥

    gEar conTrol (1/3) operation With the engine running READY mes- sage lit on the instrument panel ➥ 2.2, the gear control is automatically in n position. To exit position n, it is essential to de- press the front brake pedal. With your foot on the brake pedal (warning light on display A goes...
  • Page 130 gEar conTrol (2/3) Driving in mode b This mode allows driving with a more dynamic regenerative mode. When releasing the accelerator, the vehicle uses regenerative braking to slow down the vehicle. Thus the motor generates higher electrical current which allows the traction battery to be recharged.

  • Page 131: Parking The Vehicle

    gEar conTrol (3/3) To select reverse gear Parking the vehicle With the vehicle stationary, engine run- With the vehicle stationary, start the ning, nposition, D or b engaged, de- engine. Neutral is engaged and the as- press the brake pedal and move for- sisted parking brake is applied auto- ward the lever by two notches, r lights matically.
  • Page 132 ElEcTronic Parking brakE (1/4) To confirm that the electronic parking brake is applied, the message “Parking Brake ON” and warning light on the instrument panel and warning light 2 on the switch 3 light up. After the engine is switched off, indi- cator light 2 goes out several minutes after the assisted parking brake has been applied and indicator light...

  • Page 133: Electronic Parking Brake

    ElEcTronic Parking brakE (2/4) assisted operation (continued) note: in some situations (electronic parking brake failure, manual release of the parking brake, etc.), a beep sounds and the message “WARNING: Apply Parking Brake” appears on the instru- ment panel to warn you that the elec- tronic parking brake has been released.
  • Page 134 ElEcTronic Parking brakE (3/4) brief stop To park, without applying the electronic parking brake (if there is a risk of freez- To apply the electronic parking brake ing, for example): manually (when stopping at a red light, – stop the engine by pressing the or stopping when the engine is running, engine Start/Stop button 1;...
  • Page 135 ElEcTronic Parking brakE (4/4) operating faults For safety reasons, automatic release is deactivated when the driver’s door © – If there is a fault, the warning is open or not shut properly and the light illuminates on the instrument engine is running (in order to prevent panel accompanied by the “Check the vehicle from moving without the Parking Brake”...
  • Page 136 EnvironmEnT Please make your own recycling Your vehicle has been designed with respect for the environment in mind for contribution towards Your vehicle is 85% recyclable and its entire service life: during production, protecting the environment 95% recoverable. use and at the end of its life. too.
  • Page 137 Driving aDvicE, Eco-Driving (1/3) Consumption in real time depends on optimum use zone 0 vehicle usage conditions, equipment Indicates nil consumption. fitted and the user’s driving style. To op- timise fuel consumption, please refer to green “recommended the following advice. consumption”...

  • Page 138: Navigation System

    Driving aDvicE, Eco-Driving (2/3) Driving style indicator Press the 3 or 4 switch to access the – an overall grade taking into account indicator menu, then confirm by press- acceleration, braking anticipation Informs you about the driving style ing 5 “OK”. and your skill in managing speed;...

  • Page 139: Eco Mode

    Driving aDvicE, Eco-Driving (3/3) Disabling the function Press the switch 7.  goes out on the Warning light 8 instrument panel. Eco mode While driving, it is possible to exit the ECO mode temporarily in order to im- ECO mode is a function which opti- prove engine performance.
  • Page 140 vEhiclE rangE: recommendations (1/2) In real usage, the range of an electric vehicle may vary depending on several factors over which you have partial con- trol, which may make a considerable difference to the vehicle range. These factors are: – speed and driving style; –...

  • Page 141: Vehicle Loading

    vEhiclE rangE: recommendations (2/2) vehicle loading Avoid pointlessly overloading your ve- hicle. heating levels Tyres The use of heating or air-conditioning An under-inflated tyre increases energy reduces vehicle range. consumption. Comply with the speci- To maintain your vehicle range, you are fied tyre pressures for your vehicle.

  • Page 142: Tyre Pressure Monitoring System

    TyrE PrEssUrE moniToring sysTEm (1/3) resetting the standard level resetting procedure for the tyre pressures Ignition on, vehicle stopped: – Repeatedly tap switch 5 as many This should be done: times as necessary to reach the ve- – when the standard tyre pressure hicle tab;...
  • Page 143 TyrE PrEssUrE moniToring sysTEm (2/3) “adjust Tyre Pressure” “Puncture” A yellow wheel appears accompanied A red wheel appears accompanied by   by a fixed 6 warning light and the a fixed 6 warning light and the message “Adjust Tyre Pressure”. message “Puncture”...
  • Page 144 As the valves are specifically designed, wheels have been fitted with sensors ➥ 5.6. only use equipment approved by the not recognised by Renault. Contact an approved Dealer to fit new approved network. ➥ 5.3. tyres and to find out about available ac-...

  • Page 145: Active Emergency Braking

    acTivE EmErgEncy braking (1/7) Depending on the reactivity of the driver, the system can assist with brak- ing in order to limit damage or prevent a collision. note: ensure that the windscreen and front bumper are not obstructed (by dirt, mud, snow, condensation, number plate, etc.).
  • Page 146 acTivE EmErgEncy braking (2/7) operation special features of warnings Depending on the speed, the warning Detection of vehicles and braking may be activated simulta- When driving at a speed between ap- neously. proximately 4 mph (7 km/h) and 105 mph (170 km/h), if there is a risk of special features of stationary collision with the vehicle in front, the vehicles...
  • Page 147 acTivE EmErgEncy braking (3/7) Detection of pedestrians special features of warnings (depending on the vehicle) Depending on the speed, the warning When driving at a speed between ap- and braking may be activated simulta- proximately 4 mph (7 km/h) and 50 mph neously.
  • Page 148 acTivE EmErgEncy braking (4/7) Temporarily not available operating faults  If the system detects a temporary fault, ©  illuminated on the in- warning light appears on the strument panel: this indicates that the instrument panel. system has detected an operating fault. Consult an approved dealer.
  • Page 149 acTivE EmErgEncy braking (5/7) active emergency braking This function is an additional driving aid. This function is not under any circumstances intended to replace the due care and attention of the driver, who should at all times be in control of the vehicle. The triggering of this function may be delayed or prevented when the system detects clear signs of control of the vehicle by the driver (action on the steer- ing wheel, pedals etc.).
  • Page 150 acTivE EmErgEncy braking (6/7) system disturbance Some conditions can disturb or damage the operation of the system, such as: – a complex environment (metal bridge, tunnel etc.); – poor weather conditions (snow, hail, black ice etc.); – poor visibility (night, fog etc.); –...
  • Page 151 acTivE EmErgEncy braking (7/7) Deactivating the function You must disable the function if: – the brake lights are not functioning; – the area of the camera has been damaged (on the windscreen side or the interior rear-view mirror side); – the front of the vehicle was damaged (impact, scratch on the radar, etc.); –...
  • Page 152 DrivEr corrEcTion DEvicEs, aiDs (1/5) abs (anti-lock braking Depending on the vehicle, they com- prise: system) – the (anti-lock braking Under heavy braking, the ABS prevents system); the wheels from locking, allowing the – the electronic stability program stopping distance to be managed and Esc with understeer control and keeping control of the vehicle.
  • Page 153 DrivEr corrEcTion DEvicEs, aiDs (2/5) Electronic stability program operating faults Understeer control Esc with understeer control This system optimises the action of the © – are lit on the in- and traction control ESC in the case of pronounced under- strument panel accompanied, de- steer (loss of front axle road holding).
  • Page 154 DrivEr corrEcTion DEvicEs, aiDs (3/5) Emergency brake assist hazard warning lights switching on Depending on the vehicle, these may This system supplements the ABS light up in the event of sudden decel- and helps reduce vehicle stopping dis- eration. tances. braking anticipation operating principle Depending on the vehicle, when you...
  • Page 155 DrivEr corrEcTion DEvicEs, aiDs (4/5) hill start assistance Depending on the gradient of the in- cline, this system assists the driver when starting on a hill. It prevents the vehicle from rolling backwards by au- The hill start assistance tomatically applying the brakes when system cannot completely the driver lifts his/her foot off the brake prevent the vehicle from...
  • Page 156 DrivEr corrEcTion DEvicEs, aiDs (5/5) regenerative braking system operating faults © When braking, the regenerative brak- – lights up on the instru- ment panel, alongside the mes- ing system can convert the energy pro- sage “WARNING: Check Braking duced by the vehicle deceleration into System”: braking assistance is electric energy.
  • Page 157 lanE DEParTUrE warning (1/4) Using information from the 1 camera, the function warns the driver when a continuous or broken line is crossed or when approaching the roadside (di- vider, barrier, pavement, embankment, etc.) without the direction indicator lights being activated. This function is an addi- tional driving aid.

  • Page 158: Lane Departure Warning

    lanE DEParTUrE warning (2/4) operation When the function is activated, the  warning light and the left and right lines 3 are displayed in grey on the instrument panel. The function is set to notify the driver if: – speed is between approximately 43 mph (70 km/h) and 112 mph (180 km/h);...
  • Page 159 lanE DEParTUrE warning (3/4) Temporarily not available adjustment – very fast lane departure; With the vehicle stationary, engine run- – driving continuously on a line; ning, from the multimedia screen 4 – four seconds approximately after select the “Settings” menu, “Vehicle” changing lanes;...
  • Page 160 lanE DEParTUrE warning (4/4) This function is an additional driving aid. This function is not under any circumstances intended to replace the due care and attention of the driver, who should at all times be in control of the vehicle. system servicing/repairs –...
  • Page 161 lanE kEEPing assisT (1/5) note: make sure the windscreen is not obscured (dirt, mud, snow, condensa- tion etc.). Using information from the 1 camera, the function triggers corrective action on the vehicle steering system when a continuous or broken line is crossed or when approaching the roadside (di- vider, barrier, pavement, embankment, etc.) without the direction indicator...
  • Page 162 lanE kEEPing assisT (2/5) To disable the function, press the 2 switch as many times as required to select “Lane Keeping deactivated” on the instrument panel.  Warning light goes out on the in- strument panel. note: deactivating the “Lane Keeping Assist”...
  • Page 163 lanE kEEPing assisT (3/5) In these cases: special case – the function triggers an action on the If the system can no longer detect vehicle’s steering system to correct any action by the driver on the steer-  the vehicle trajectory; ing wheel, the warning light il- –...
  • Page 164 lanE kEEPing assisT (4/5) Temporarily not available adjustment With the vehicle stationary, engine run- – very fast lane departure; ning, from the multimedia screen 4 – driving continuously on a line; select the “Settings” menu, “Vehicle” – four seconds approximately after tab, the “Driving assistance”...
  • Page 165 lanE kEEPing assisT (5/5) This function is an additional driving aid. This function is not under any circumstances intended to replace the due care and attention of the driver, who should at all times be in control of the vehicle. system servicing/repairs –...
  • Page 166 blinD sPoT warning (1/5) This function is an addi- tional aid which indicates other vehicles in the blind spot area. special feature This system alerts the driver to other It can never in any case be a sub- vehicles in the detection zone A. Make sure that the sensors are not ob- stitute for care nor for the driver’s scured (by dirt, mud, snow, etc.).
  • Page 167 blinD sPoT warning (2/5) activation/deactivation indicator 3 operation Vehicle stationary, engine running, from An indicator light 3 is located on each This function gives a warning: the multimedia screen 2, select the rear view mirror 4. – when the vehicle speed is between “Settings”...
  • Page 168 blinD sPoT warning (3/5) Display B operating faults The function is activated and has not If the system detects a fault, the mes- detected any vehicles. sage “Check blind spot alert” is dis- played on the instrument panel. Call an approved Dealer.
  • Page 169 blinD sPoT warning (4/5) This function is an additional driving aid. This function is not under any circumstances intended to replace the due care and attention of the driver, who should at all times be in control of the vehicle. The driver should always adapt their speed to the traffic conditions, regardless of the system indications.
  • Page 170 blinD sPoT warning (5/5) limitation of the system operation – The sensors must be kept clean and free of modifications in order for the system to operate correctly. – Small objects moving close to the vehicle (motorcycles, bicycles, pedestrians, etc.) may not be recognised by the system.
  • Page 171 DETEcTion of roaD signs (1/4) note: make sure the windscreen is not For vehicles equipped with a navigation obscured (dirt, mud, snow, condensa- system and if the vehicle is travelling in tion etc.). a country where the speed units differ from those of the vehicle, the system For vehicles which are equipped with it, displays the speed limit sign in the unit...
  • Page 172 DETEcTion of roaD signs (2/4) – press the 4 or 5 control repeatedly to reach the “Settings” menu. Press the switch 6 ok; – press the 4 or 5 control repeatedly to reach the “DRIVING ASSIST” menu. Press the switch 6 ok; –...
  • Page 173 DETEcTion of roaD signs (3/4) If the speed limit is exceeded, the circle around the panel flashes (7 warning light) along with a sound signal to warn the driver. operation varying the limit speed If the speed limit notification differs from warning lights the detected speed value, press and The function displays the following...
  • Page 174 DETEcTion of roaD signs (4/4) operating faults The system cannot detect the speed limit if: – the windscreen is not clean; – the camera is blinded by the sun; – there is insufficient visibility (night, fog etc.); – the signs are not legible (snow, etc.) or are hidden (by another vehicle or by trees);...
  • Page 175 sPEED limiTEr (1/4) controls Driving 1 Speed limiter On/Off switch. When a limit speed has been set but not yet reached, driving is similar to 2 Cruise control On/Off switch. driving a vehicle without the speed lim- 3 Switch to activate and decrease the iter function.
  • Page 176 sPEED limiTEr (2/4) switching on To store the current speed, press the 4 switch (RES/+) or the 3 switch (SET/- ): Press switch 1. The 6 warning light ap- the limit speed replaces the dashes pears in grey. The “Speed limiter ON” and, depending on the vehicle, the 6 message appears on the instrument warning light appears in white.
  • Page 177 sPEED limiTEr (3/4) Exceeding the limit speed limited speed cannot be maintained When driving down a steep gradient, It is possible to exceed the limit speed the system may not maintain the limit at any time. To do this: press the accel- speed: the limit speed flashes in red erator pedal firmly and fully (beyond on the instrument panel and an audi-...
  • Page 178 sPEED limiTEr (4/4) switching off the function The speed limiter function is inter- rupted: – when you press the 1 switch. In this case, the speed is no longer stored; – when you press the 2 switch. In this case the cruise control is selected and there is no stored speed.
  • Page 179 crUisE conTrol (1/5) controls 1 Cruise control On/Off switch. 2 Switch to activate and decrease cruising speed (SET/-). 3 Switch to activate and increase cruising speed or to recall the mem- orised cruising speed (RES/+). 4 Switch the function to standby (with cruising speed saved) (0).
  • Page 180 crUisE conTrol (2/5) Driving Once a cruising speed is registered and the cruise control function is active, you may lift your foot off the accelera- tor pedal. switching on activating cruise control Press switch 1. At a steady speed above approximately 19 mph (30 km/h), press the 2 (SET/-) The 6 warning light appears in grey.
  • Page 181 crUisE conTrol (3/5) Exceeding the cruising speed The cruising speed may be exceeded at any time by depressing the accelera- tor pedal. While it is being exceeded, the cruising speed flashes on the instrument panel. Then, release the accelerator pedal: after a few seconds, the vehicle will automatically return to its set cruising speed.
  • Page 182 crUisE conTrol (4/5) nb: if the speed previously stored is much higher than the current speed, the vehicle will accelerate more rapidly to reach this threshold. When the cruise control is set to standby, pressing switch 2 (SET/-) re- activates the cruise control function without taking into account the stored speed: it is the speed at which the vehi- cle is moving that is taken into account.
  • Page 183 crUisE conTrol (5/5) switching off the function The 6 warning light disappears from the instrument panel and the “Cruise con- The cruise control function is inter- trol OFF” message appears to confirm rupted: that the function is disabled. – when you press the 1 switch. In this case, the speed is no longer stored;...
  • Page 184 “aUToholD” fUncTion Vehicle stopped (e.g. at a red light, an conditions for interrupting the intersection, a traffic jam, etc.), the func- braking force tion ensures braking force even when The following conditions must be met: the driver releases the brake pedal. –...

  • Page 185: Parking Distance Control

    Parking DisTancE conTrol (1/4) special features Depending on the vehicle, the system detects obstacles to the front, the rear Ensure that the ultrasonic sensors indi- and the sides of the vehicle. cated by arrows 1 are not obscured (by The parking distance control system dirt, mud, snow, etc.).
  • Page 186 Parking DisTancE conTrol (2/4) operation note: the display 2 shows the vehicle surroundings and emits beeps. Most objects located less near the It is necessary to travel a few metres front, rear and sides of the vehicle are before the side detection is activated. detected.
  • Page 187 Parking DisTancE conTrol (3/4) If a side obstacle is detected: – the beeps become faster and then sound continuously as the obstacle gets nearer. Green, orange and red zones will be displayed on the dis- play D; – if there is no risk of collision, no beep will sound when approaching the ob- stacle.
  • Page 188 Parking DisTancE conTrol (4/4) adjustment Deactivating the parking operating faults distance control manually Depending on the vehicle, with the ve- If the system detects an operating fault, hicle stationary, engine running, some a beep sounds for approximately three If towing, carrying or trailer equipment is settings can be adjusted from the multi- seconds each time the reverse gear is present in front of the ultrasonic detec-...
  • Page 189 rEvErsing camEra (1/2) operation fixed clearance gauge 3 4 moving guide line: The fixed clearance gauge comprises This is shown in blue on the multime- When the vehicle is reversing, the coloured markers A, B and C indicating dia screen 2. It indicates the vehicle tra- camera 1 on the luggage compart- the distance behind the vehicle: jectory according to the position of the...
  • Page 190 rEvErsing camEra (2/2) The screen shows a reverse mirror image. activating, deactivating the This function is an additional The frames are a representation reversing camera aid. It cannot, therefore, projected on a flat surface. This in- under any circumstances With the vehicle stationary and the formation is to not be taken into ac- replace the vigilance or the engine running, from the multimedia...
  • Page 191 assisTED Parking (1/5) switching on special features Using ultrasonic detectors as indicated by the 3 arrows installed in the vehicle While the engine is running, vehicle Ensure that the ultrasonic sensors indi- bumpers, this function helps to find ac- stationary or driving at less than ap- cated by arrows 3 are not obscured (by cessible parking spaces and assists in proximately 19 mph (30 km/h):...
  • Page 192 assisTED Parking (2/5) operation note: when starting the vehicle, or after having successfully completed parallel Parking parking using the system, the default manoeuvre proposed by the system is As long as the vehicle speed is less assistance in exiting a parallel parking than 19 mph (30 km/h), the system space.
  • Page 193 assisTED Parking (3/5) The space is then indicated on the mul- – Release the steering wheel; timedia screen by a capital letter “P”. – carry out manoeuvres at the front – Stop the vehicle; and rear by following the instructions shown on the multimedia screen 1 –...
  • Page 194 assisTED Parking (4/5) cancelling the manoeuvre The warning light on the 2 switch turns  The manoeuvre is cancelled in the fol- off and the warning light disap- lowing cases: pears from the instrument panel and a sound signal confirms that the manoeu- –...
  • Page 195 assisTED Parking (5/5) This function is an additional driving aid. This function is not under any circumstances intended to replace the due care and attention of the driver, who should at all times be in control of the vehicle. Make sure that the manoeuvre complies with the applicable traffic regulations in your location.
  • Page 196 2.72...
  • Page 197 Section 3: Your comfort Air Vents ..............Manual air conditioning .
  • Page 198 air vEnTs: air outlets (1/2) 1 side air vent. 4 centre air vents. 2 side demister outlet. 5 passenger footwell heater outlets. 3 windscreen demisting vents. 6 control panel.
  • Page 199 air vEnTs: air outlets (2/2) To remove bad odours from your ve- hicles, only use the systems designed for this purpose. Consult an approved Dealer. centre air vents. side air vents Direction air flow Move cursors 4 to the required position. To open air vent 1, press on the air vent (point 7) until it is open as far as re- quired.

  • Page 200: Manual Air Conditioning

    manUal air conDiTioning (1/3) The air conditioning system is used for: – lowering the temperature inside the passenger compartment; – eliminating condensation more quickly. advice: to optimize vehicle range, de- activate the air conditioning when the outside temperature is comfortable. adjusting the ventilation speed Turn the control 3 to one of the eight...
  • Page 201 manUal air conDiTioning (2/3) rear screen de-icing/ demisting Press the 7 button: the integrated in- dicator light comes on. This function enables rapid demisting or de-icing of the rear screen and de-icing of the door mirrors (on equipped vehicles). To exit this function, press button 7 again.
  • Page 202 manUal air conDiTioning (3/3) air recirculation is for: – isolating the vehicle from the exter- nal atmosphere (driving in polluted areas, etc.); – lowering the passenger compart- ment temperature as quickly as pos- sible. stopping the system Press button 3. clear view function switching the air recirculation on...

  • Page 203: Automatic Climate Control

    aUTomaTic climaTE conTrol (1/4) adjusting the ventilation speed. In automatic mode, the system uses the most suitable amount of air to reach and maintain the desired comfort level. You can still adjust the ventilation speed by turning control 1 to increase or reduce the ventilation speed.
  • Page 204 aUTomaTic climaTE conTrol (2/4) clear view function Press the 2 button: the integrated indi- cator light comes on. This function quickly de-mists the wind- screen, rear screen, front side windows and door mirrors (depending on the vehicle). The air conditioning and rear screen de-icing functions must be ac- tivated.
  • Page 205 aUTomaTic climaTE conTrol (3/4) rear screen de-icing/ switching air conditioning on demisting or off Press the 8 button: the integrated in- In automatic mode, the system switches dicator light comes on. This function the air conditioning system on or off, enables rapid demisting or de-icing of depending on the climate conditions.
  • Page 206 aUTomaTic climaTE conTrol (4/4) stopping the system Turn the control 1 to “off” to stop the system. To start it, turn the control 1 again, then adjust the fan speed or press the button 4. air recirculation (isolation of manual use the passenger compartment) Press the 7 button: the integrated indi- cator light comes on.
  • Page 207 air conDiTioning: programming (1/2) EV programming Comfort programs Temperature Program Comfort programme 1 Edit 06:00 AM L M M J V S D Ready to L M M J V S D Comfort programme 2 L M M J V S D Ready to 09:00 AM L M M J V S D...
  • Page 208 air conDiTioning: programming (2/2) “Programme” activation with the engine running and the ve- hicle stationary, use the multimedia The function is triggered two hours screen 1 to select the “Settings” menu, prior to the programmed time in order “Vehicle” tab, then the “EV program- to reach a comfortable temperature, if: ming”...
  • Page 209 air conDiTioning: information and operating instructions (1/2) advice on use operating faults recommendations to limit energy consumption and maintain the In some situations, (air conditioning As a general rule, contact your ap- range of the vehicle: off, air recirculation activated, ventila- proved dealer in the event of an oper- Drive with the air vents open and the tion speed at zero or low, etc.) you may...
  • Page 210 air conDiTioning: information and operating instructions (2/2) Ñ Type of refrigerant fluid  Type of oil in the air condi- tioning circuit  inflammable product  consult the driver’s hand- book  maintenance Quantity of refrigerant fluid present in the ve- x.xxx kg hicle.

  • Page 211: Electric Windows

    ElEcTric winDows (1/2) Electric windows Press or pull the switch to raise or lower a window to the desired height (the rear windows do not open fully); These systems operate with the igni- tion on or off, until one of the front doors is opened (limited to about 3 minutes).
  • Page 212 ElEcTric winDows (2/2) operating faults one-touch mode (depending on vehicle) If a fault occurs when closing a window, This mode works in addition to the the system switches to normal mode: operation of the electric windows de- lift the switch concerned as many times scribed previously.

  • Page 213: Sun Visor

    inTErior lighTing, sUn visor map reading light luggage compartment light sun visor (depending on the vehicle) Light 3 comes on when the luggage Lower the sun visor 4 over the wind- compartment is opened. screen or unclip it and turn it over the Press switch 1 of 2 for: side window.
  • Page 214 PassEngEr comParTmEnT sToragE, fiTTings (1/3) front door storage induction charging area 2 central storage compartments 1 compartment 3 This is used to charge your phone with- out the need for a cable. Please refer to the multimedia instructions for further cup holder 4 information.

  • Page 215: Glove Box

    PassEngEr comParTmEnT sToragE, fiTTings (2/3) sun blind storage Dashboard storage 6 compartment 5 glove box Can be used to hold motorway toll tick- ets, maps, etc. Pull handle 7 to open it. It can hold A4 size documents, a large bottle of water, etc.
  • Page 216 PassEngEr comParTmEnT sToragE, fiTTings (3/3) grab handle 8 rear door storage storage pocket 10 with side compartment 9 opening This offers support and can be held when the vehicle is being driven. Do not use it for getting into or out of the vehicle.
  • Page 217 accEssoriEs sockET accessories sockets 1 They are provided for connecting ac- cessories approved by our Technical Department. Connect accessories with a maximum power of 120 watts (12 V) only. When several accessory sockets are used at the same time, the total power of the connected accessories must not exceed 180 watts.

  • Page 218: Rear Headrests

    rEar hEaDrEsTs Position for use To refit the headrest Raise or lower the headrest while pull- Insert the headrest rods into the holes, ing it towards the front of the vehicle. and lower the headrest to the first notch. Check that it is correctly locked. To remove the headrest storage position Press the button A on the switch 1 and...
  • Page 219 rEar bEnch sEaT: functions To replace the seatback, proceed in the reverse order to removal. Before moving the seatback, put Refit the seatback and click it back into the seat belt in belt guide A to avoid place. damaging it. When moving the rear seats, ensure that nothing obstructs the anchorage...
  • Page 220 rEar ParcEl shElf rear parcel shelf – push the shelf 2 inwards and turn it; – pull the shelf towards you. To remove: To refit, proceed in the reverse order to – lower the rear headrests; removal. – unhook both straps 1; –...
  • Page 221 lUggagE comParTmEnT covEr: utility versions The luggage compartment cover con- The luggage compartment cover is The luggage compartment cover is sists of a rigid section A and a folding in the folded position. removed. section B. To fold it: To remove it: with the cover in the folded The luggage cover is in the unfolded position and holding it horizontally: –...
  • Page 222 lUggagE comParTmEnT sPoilEr opening spoiler Press button 1 and lift the tailgate. It is forbidden to attach objects and/ or accessories (bike rack, etc.) to spoiler A. closing Lower the luggage compartment lid, depending on the vehicle, initially using the inside handle to assist you. 3.26...

  • Page 223: Transporting Objects In The Luggage Compartment

    TransPorTing obJEcTs in ThE lUggagE comParTmEnT Always position the objects transported so that the largest surface is against: – The rear bench seatback for normal loads (example A). – The front seatbacks with the rear seatbacks folded down, as is the case for maximum loads (example B).

  • Page 224: Multimedia Equipment

    mUlTimEDia EQUiPmEnT The presence and location of this equip- ment depends on the vehicle version. 1 Multimedia touchscreen display; 2 Multimedia sockets; 3 Steering column control; 4 Voice commands; 5 Microphone. Using the telephone We remind you of the need to conform to the legislation in force concerning the use of such equipment.
  • Page 225 Section 4: Maintenance Bonnet ............... . Levels .
  • Page 226 bonnET (1/2) Please note when work- ing close to the engine that it may be hot. The engine Unlocking the bonnet catch To open, pull handle 1, located on the cooling fan may also start left-hand side of the dashboard. ...

  • Page 227: Opening The Bonnet

    bonnET (2/2) opening the bonnet closing the bonnet Lift the bonnet; you will need to guide it Check that nothing has been left in the as it is held by a strut. engine compartment. To close the bonnet again, hold the bonnet in the middle and guide it down, allowing a 30 cm gap before it is closed, then release it.
  • Page 228 lEvEls (1/2) checking intervals replacement intervals check the coolant level regularly Refer to the Maintenance Document for (very severe damage is likely to be your vehicle. caused to the engine if it runs out of coolant). If the level needs to be topped up, only use products approved by our Technical Department which ensure: –...

  • Page 229: Brake Fluid

    lEvEls (2/2) Topping up After any operation on the hydraulic circuit, a specialist must replace the fluid. Only use fluids approved by our Technical Department (and taken from a sealed container). level 2 It is normal for the level to drop as the linings become worn, but it should never drop below the “min”...
  • Page 230 sEconDary 12 v baTTEry (1/2) maintenance/replacement The charge status of the 12 volt bat- tery 1 can decrease, especially if you use your vehicle: – when the outside temperature drops; – after extended use of energy-con- suming devices with the engine switched off.
  • Page 231 sEconDary 12 v baTTEry (2/2) breakdown recovery To avoid damaging your vehicle, do not recharge the secondary 12 V battery using: – an external battery charger; – a battery from another vehicle. Please contact an Authorised Dealer. label A Observe the indications on the battery. 2 naked flames and smoking are forbid- den;...

  • Page 232: Tyre Pressure

    TyrE PrEssUrE vehicle fitted with a tyre pressure monitoring system In the event of under-inflation (punc-  tures, under-inflation, etc.), the warning light appears on the instrument panel. ➥ 2.18. For your safety, please re- spect the speed limit. When they need to be re- placed, only tyres of the label A B : dimension of the tyres fitted to the...
  • Page 233 boDywork mainTEnancE (1/3) you should A well-maintained vehicle will last Observe the vehicle stopping distances longer. It is therefore recommended to when driving on gravelled surfaces to Wash your car frequently, with the maintain the exterior of the vehicle reg- prevent paint damage.
  • Page 234 boDywork mainTEnancE (2/3) what you should not do Wash the vehicle in bright sunlight or Degrease or clean using freezing temperatures. high-pressure cleaning Do not scrape off mud or dirt without equipment or by spray- pre-wetting. ing on products not ap- proved by our Technical Allow dirt to accumulate on the exterior.
  • Page 235 boDywork mainTEnancE (3/3) vehicles with a matte paint Using a roller type car wash cleaning the headlights, finish sensors and cameras Return the wiper stalk to the park po- sition. ➥ 1.103. Check the mounting of This type of paint requires certain pre- Use a soft cloth or cotton wool.

  • Page 236: Seat Belts

    inTErior Trim mainTEnancE (1/2) glass instrument panel Textiles (seats, door trim, etc) A well-maintained vehicle will last longer. It is therefore recommended to (e.g. instrument panel, clock, exterior Vacuum-clean the textiles regularly. maintain the interior of the vehicle regu- temperature display, radio display etc.). larly.
  • Page 237 inTErior Trim mainTEnancE (2/2) removal/replacing removable you should not: equipment originally fitted in Position objects such as deodorants, the vehicle scents etc. near air vents as this could damage your dashboard trim. If you need to remove equipment in order to clean the passenger com- partment (for example, mats), always ensure that they are correctly refitted and are the right way around (the driv-...
  • Page 238 4.14...
  • Page 239 Section 5: Practical advice Tool kit ............... . Tyre inflation kit .

  • Page 240: Tool Kit

    Tool kiT lever 1 The tools included in the tool kit depend on the vehicle. This locks or unlocks the wheel bolts Never leave tools unse- Tool kit A is located in the tray under and tow eye. cured in the vehicle: there the luggage compartment carpet.
  • Page 241 TyrE PrEssUrE kiT (1/3) Do not attempt to use the The kit is only approved for inflation kit if the tyre has inflating the tyres of the ve- been damaged as a result hicle originally equipped of driving with a puncture. with the kit.
  • Page 242 TyrE PrEssUrE kiT (2/3) with the engine running and the if a minimum pressure of 1.8 bar is parking brake applied, not reached after 15 minutes, repair is not possible; do not drive the ve- – Disconnect any accessories previ- hicle but contact an approved dealer.
  • Page 243 TyrE PrEssUrE kiT (3/3) – Start immediately and drive at a speed between 12 to 37 mph (20 to 60 km/h) in order to distribute the product evenly in the tyre; after driv- ing a distance of 2 miles (3 km), stop and check the pressure.
  • Page 244 TyrEs (1/4) The tyres are the only contact between When the tyre tread has been worn to the vehicle and the road, so it is essen- the level of the wear indicators, they become visible 2: it is then necessary tial to keep them in good condition.

  • Page 245: Tyre Pressures

    TyrEs (2/4) Tyre pressures Pressures should be checked when the vehicle fitted with a tyre pressure tyres are cold; ignore higher pressures monitoring system Adhere to the tyre pressures. The tyre which may be reached in hot weather In the event of under-inflation (punc- pressures should be checked at least or following a fast journey.
  • Page 246 TyrEs (3/4) fitting new tyres Use in winter chains for safety reasons, fitting snow chains to the rear axle is strictly for- bidden. chains cannot be fitted to tyres which are larger than those originally fitted to the vehicle. For your safety, please re- snow or winter tyres spect the speed limit.
  • Page 247 TyrEs (4/4) studded tyres This type of equipment may only be used for a limited period and as laid down by local legislation. It is neces- sary to observe the speed specified by current legislation. These tyres must, at a minimum, be fitted to the two front wheels.
  • Page 248 fronT hEaDlighTs: replacing the bulbs lED front fog lights/ cornering lights 3 (depending on the vehicle) Consult an authorised dealer. additional lights If you wish to fit fog lights to your ve- hicle, please see an authorised dealer. lED daytime running lights/ side lights 1 (depending on the vehicle) Please see an authorised dealer.
  • Page 249 rEar lighTs anD siDE lighTs: changing bulbs (1/2) reversing lights and rear fog lights 3 Access bulb holder via the underneath of the vehicle, then unscrew it by turn- ing towards the centre of the vehicle. fog light bulb type: Pr21w. reversing light bulb type: P21w.
  • Page 250 rEar anD siDE lighTs: changing bulbs (2/2) number plate lights 4 indicator lights 6 – Unclip light 4 by pressing tab 5; Consult an approved dealer. – remove the light cover to gain access to the bulb. bulb type: w5w. The bulbs are under pres- sure and can break when replaced.
  • Page 251 inTErior lighTing: changing bulbs (1/2) map reading lights 1 courtesy mirror lights 2 Consult an authorised dealer. Please consult an authorised dealer. 5.13...
  • Page 252 inTErior lighTing: changing bulbs (2/2) luggage compartment light Disconnect the light. Press tab 4 to release lens 6 and Unclip the light 3 by pressing the tab on access bulb 5. its left side (using a flat-bladed screw- driver or similar). bulb type: w5w.

  • Page 253: Replacing The Battery

    “hanDs-frEE” carD: battery (1/2) The batteries are available from ap- proved Dealers, and their service life approximately two years. Check that there is no dye on the battery: risk of an incorrect electrical con- tact. When they need to be re- replacing the battery When refitting, proceed in the reverse placed, be sure to use...
  • Page 254 “hanDs-frEE” carD: battery (2/2) operating faults If the battery is too weak to ensure cor- rect operation, you will still be able to start and lock/unlock the vehicle ➥ 1.28. Precautions relating to batteries: – keep (new or used) bat- teries out of reach of chil- dren;...

  • Page 255: Fuse Box

    fUsEs (1/2) fuse box Tweezers 1 If any electrical component does not Remove the fuse using tweezers 1, lo- work, check the condition of the fuses. cated at the back of flap A. Unclip the access flap A. To remove the fuse from the tweezers, Check the fuse in question slide the fuse to the side.
  • Page 256 fUsEs (2/2) allocation of fuses (the presence of certain fuse depends on the vehicle equipment level) symbol allocation Use the fuse allocation label in the storage compartment to identify the Windscreen washer fuses. Multimedia accessories socket, multimedia î Certain fuses should only be re- screen placed by a qualified professional.
  • Page 257 fiTTing a raDio – In all cases, it is very important to follow the manufacturer’s instruc- tions carefully. radio location 1 Door speakers 2 – The specifications of the brack- ets and wires (available from our Unclip the blanking cover. The aerial, + To install any equipment, please con- network) vary depending on the and –...
  • Page 258 accEssoriEs Electrical and electronic accessories Before installing this type of accessory (particularly for transmitters/receivers: frequency bandwidth, power level, po- sition of the aerial, etc.), make sure it is compatible with your vehicle. You can get advice from an authorised dealer. Connect accessories with a maximum power of 120 Watts only.
  • Page 259 winDscrEEn wiPEr blaDEs (1/2) replacing windscreen wiper To refit blades 2 To refit the wiper blade 2, insert it in its housing in the arm 3, then clip it until To replace the wipers, first put them in you hear a click. Make sure that the the service position B.
  • Page 260 winDscrEEn wiPEr blaDEs (2/2) To refit To refit the wiper blade, proceed in re- verse order to removal. Make sure that the blade is correctly locked in position. – In frosty weather, make sure that the wiper blades are not stuck by ice (to avoid the risk of the motor overheating).
  • Page 261 Towing, brEakDown (1/3) choice of breakdown service in the event of an energy fault In the event of a fully discharged trac- tion battery, any type of towing is per- mitted: towing on a flatbed truck or towing on the road using the tow eye (please see following pages).
  • Page 262 Towing, brEakDown (2/3) Before towing, unlock the steering column: with the card in the passenger compartment, engage lever 4 in posi- tion n, then press the engine start button for approximately two seconds. The column is unlocked, the acces- sory functions are supplied: the vehi- cle lights can be used (hazard warn- ing lights, brake lights etc.).
  • Page 263 Towing, brEakDown (3/3) Unclip the cover 5 by inserting a flat- blade screwdriver or similar under the cover. Tighten the towing hitch 4 fully: first by hand until it stops then finish by lock- ing it with the lever. Only use tow ring 4 and the lever lo- cated under the luggage compartment carpet in the tool kit ➥...
  • Page 264 oPEraTing faUlTs (1/4) The following advice will enable you to carry out quick, temporary repairs. for safety reasons you should always contact an approved dealer as soon as possible. faUlTs PossiblE caUsEs whaT To Do Impossible to charge the traction bat- The outdoor temperature is lower Recharge your vehicle in a more suitable tery.
  • Page 265 oPEraTing faUlTs (2/4) faUlTs PossiblE caUsEs whaT To Do Steering becomes heavy. Assistance overheating. Drive carefully at reduced speed, be aware of the level of force in the steering wheel needed to turn the wheels. Fault with the electric assistance Consult an authorised dealer.
  • Page 266 oPEraTing faUlTs (3/4) Electrical equipment PossiblE caUsEs acTion rEQUirED The wipers do not work. Wiper blades stuck. Free the blades before using the wipers. Broken windscreen wiper fuse. Consult an approved dealer. Blown rear screen wiper fuse (intermit- Replace the fuse or have it replaced tent, permanently stopped).
  • Page 267 oPEraTing faUlTs (4/4) Electrical equipment PossiblE caUsEs acTion rEQUirED The headlights Only one: – blown bulb, Replace the bulb or have it replaced. are not working. – disconnected wire or incorrectly-posi- Check and reconnect the wire or the con- tioned connector, nector.
  • Page 268 5.30...
  • Page 269 Section 6: Technical specifications Vehicle identification plates ............Engine identification plate .

  • Page 270: Vehicle Identification Plates

    vEhiclE iDEnTificaTion PlaTEs The information shown on the ve- 4 MAM (Maximum Authorised hicle identification plate should be Mass). quoted on all correspondence or orders. 5 GTW (Gross train weight: vehicle fully loaded, with trailer). vehicle identification plate A 6 MPAW (Maximim Permissible 1 Manufacturer name.
  • Page 271 EnginE iDEnTificaTion PlaTE/EnginE sPEcificaTion Engine specification Please quote the information on the engine plate or label A in all corre- Engine type: 5AGEN3 spondence or orders. (Location varies depending on engine) 1 Engine type. 2 Engine suffix. 3 Engine number.
  • Page 272 wEighTs (in kg) The weights indicated for a basic vehicle without options: they vary depending on the your vehicle’s equipment. consult your approved Dealer. maximum permissible all-up weight (mmac) Weights indicated on the vehicle identification plate ➥ 6.2. Total train weight (mTr) braked Trailer weight Prohibited Unbraked Trailer weight...
  • Page 273 DimEnsions (in metres) 0,839 2,588 0,657 1,511 4,084 1,562* 1,510 1,945 Unladen...

  • Page 274: Replacement Parts And Repairs

    rEPlacEmEnT ParTs anD rEPairs Original parts are based on strict specifications and are subject to highly-specialised tests. Therefore, they are of at least the same level of quality as the parts fitted originally. If you always fit genuine replacement parts to your vehicle, you will ensure that it performs well. Furthermore, repairs carried out within the manufacturer’s Network using original parts are guaranteed according to the conditions set out on the reverse of the repair order.
  • Page 275 sErvicE shEETs (1/6) vin: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: stamp Service □ ........□ anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: stamp Service □...
  • Page 276 sErvicE shEETs (2/6) vin: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: stamp Service □ ........□ anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: stamp Service □...
  • Page 277 sErvicE shEETs (3/6) vin: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: stamp Service □ ........□ anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: stamp Service □...
  • Page 278 sErvicE shEETs (4/6) vin: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: stamp Service □ ........□ anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: stamp Service □...
  • Page 279 sErvicE shEETs (5/6) vin: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: stamp Service □ ........□ anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: stamp Service □...
  • Page 280 sErvicE shEETs (6/6) vin: .................. Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: stamp Service □ ........□ anti-corrosion check: OK □ Not OK* □ *See specific page Date: Miles (Km): Invoice number: Comments/miscellaneous Type of operation: stamp Service □...
  • Page 281 anTicorrosion chEck (1/5) If the continuation of the warranty is subject to repair, it is indicated below. vin: ............Corrosion repair operation to be carried stamp out: Date of repair: stamp Repair to be carried out: Date of repair: Repair to be carried out: stamp Date of repair: 6.13...
  • Page 282 anTicorrosion chEck (2/5) If the continuation of the warranty is subject to repair, it is indicated below. vin: ............Corrosion repair operation to be carried stamp out: Date of repair: stamp Repair to be carried out: Date of repair: Repair to be carried out: stamp Date of repair: 6.14...
  • Page 283 anTicorrosion chEck (3/5) If the continuation of the warranty is subject to repair, it is indicated below. vin: ............Corrosion repair operation to be carried stamp out: Date of repair: stamp Repair to be carried out: Date of repair: Repair to be carried out: stamp Date of repair: 6.15...
  • Page 284 anTicorrosion chEck (4/5) If the continuation of the warranty is subject to repair, it is indicated below. vin: ............Corrosion repair operation to be carried stamp out: Date of repair: stamp Repair to be carried out: Date of repair: Repair to be carried out: stamp Date of repair: 6.16...
  • Page 285 anTicorrosion chEck (5/5) If the continuation of the warranty is subject to repair, it is indicated below. vin: ............Corrosion repair operation to be carried stamp out: Date of repair: stamp Repair to be carried out: Date of repair: Repair to be carried out: stamp Date of repair: 6.17...
  • Page 286 6.18...
  • Page 287 alPhabETical inDEx (1/6) 12 volt battery battery................. 0.8, 1.73 maintenance ............4.6 – 4.7 blind spot warning signal ........2.42 → 2.46 12 volt battery ..........1.2 → 1.6, 4.6 – 4.7 blind spot: warning signal ........2.42 → 2.46 bonnet................. 4.2 – 4.3 brake fluid ................
  • Page 288 alPhabETical inDEx (2/6) controls ............0.4, 1.68 → 1.71 noise ................1.6 coolant ................. 4.4 presentation ............1.2 → 1.6 courtesy light ..........3.17, 5.13 – 5.14 vehicle range ............ 2.16 – 2.17 courtesy mirrors ..............3.17 electric windows ............. 3.15 – 3.16 cruise control ..........1.73, 2.51 →...
  • Page 289 alPhabETical inDEx (3/6) instrument panel messages..1.78 → 1.86, 2.8 → 2.11, 2.60 gear lever..............2.5 → 2.7 interior.................. 0.3 glove box ................3.20 interior trim maintenance ............. 4.12 – 4.13 handbrake..............2.8, 2.60 «hands-free» card: battery ......5.15 – 5.16, 5.16 lane departure warning ..........2.33 →...
  • Page 290 alPhabETical inDEx (4/6) locking ................1.37 opening the doors ..........1.28 → 1.33 locking the doors .......1.20 → 1.33, 1.87 – 1.88 opening/closing locking/unlocking the opening elements doors ..............1.22 → 1.26 doors ................1.27 luggage compartment ........1.22 → 1.26 locking/unlocking the opening elements ....1.20 – 1.21, sunroof .............1.22 →...
  • Page 291 ............0.3 sun visor ................3.17 card ..............1.20 – 1.21 map ..............1.20 – 1.21 RENAULT ANTI-INTRUDER DEVICE (RAID) ....1.33 tailgate ............1.20 – 1.21, 3.26 replacement parts ..............6.6 tanks and reservoirs reverse gear brake fluid ..............
  • Page 292 alPhabETical inDEx (6/6) vehicle detection ............2.21 → 2.27 vehicle identification ............0.7 vehicle identification number (VIN) ........0.7 vehicle identification plates ..........0.7 vehicle range ............2.13 → 2.17 ventilation ..............3.4 → 3.10 warning buzzer ........1.28 – 1.29, 1.94, 1.99 warning lights........1.72 →...
  • Page 294 à999103019Sò î í ä S6 RENAULT S.A.S. SOCIÉTÉ PAR ACTIONS SIMPLIFIÉE AU CAPITAL DE 533 941 113 € / 13-15, QUAI LE GALLO 92100 BOULOGNE-BILLANCOURT R.C.S. NANTERRE 780 129 987 — SIRET 780 129 987 03591 / TÉL. : 0810 40 50 60...

Table of Contents

Save PDF