Astro Pneumatic 1442 Manual

This tool is intended to be used to install metric M5, M6, M8
and SAE 10-24, 1/4-20, 5/16-18 rivet nuts.
13" NUT/THREAD SETTING HAND RIVETER KIT WITH 3PC METRIC AND 3PC
SAE MANDREL/NOSEPIECE SETS AND RIVET NUT ASSORTMENT
1442
MADE IN CHINA
13" NUT/THREAD SETTING HAND RIVETER KIT WITH 3PC METRIC
AND 3PC SAE MANDREL/NOSEPIECE SETS AND RIVET
NUT ASSORTMENT
1 YEAR LIMITED WARRANTY
• Astro Pneumatic Tool Co. warrants our products to the original user against defective
material or workmanship for a period of 1 year (except where noted on our price
schedule) from the date of 1st use. Astro reserves the right to determine whether the
product failed because of defective material, workmanship or other causes and to charge
back for missing parts. Astro Pneumatic Tool Co., at its discretion, will repair products
covered under this warranty free of charge. The distributor should direct the original user
to return the product (with the exceptions listed below) with the distributor's name,
address, adequate proof of date of purchase or a copy of warranty card, and a short note
explaining the problem. Failures caused by accident, alteration, or misuse are not
covered by this warranty.
• If one part of this product fails, please do not return the entire product. Astro will
replace free of charge component parts of this product that fail within 1 year of first
use by the original user. Items included in this category include but are not limited
to kits, hand tool kits and any other product where there are multiple items or
components that make up the unit. Please contact the phone number below in
order to obtain the replacement components covered under warranty.
• Astro Pneumatic Tool Co. or its authorized service representatives must perform all
warranty repairs. Any repair to the product by unauthorized service representatives
voids this warranty. The rights under this warranty are limited to the original user and may
not be transferred to subsequent owners.
• This warranty is in lieu of all other warranties, expressed or implied, including warranties
of merchantability and fitness for a particular purpose. Some states do not allow the
exclusion of limitations of incidental or consequential damages so the
above limitations may not apply to you.
Unpacking
When unpacking, check the parts diagram and part number listing
on page 3 to make sure all parts are included. If any parts are
missing or damaged, please call your distributor.
PRODUCT INFORMATION:
• Patented structure increases power and reduces shock
• Shorter handle with double compound hinges that
maximize leverage
• Includes 13"(330mm) Hand Nut/Thread Setting Riveter
• 6 interchangeable mandrel/nosepiece sets in Metric M5-0.8,
M6-1.0, & M8-1.25 and in SAE 10-24, 1/4-20, & 5/16-18
• Includes 10 pieces of each of the following rivet nuts:
M5-0.8, M6-1.0, M8-1.25, 10-24, 1/4-20, and 5/16-18
• Versatile and powerful hand nut/thread setting riveter, takes
the hard work out of setting rivet nuts
• Ideal for working in hard-to-reach area
• Ergonomic grip for easy operation
• Includes necessary wrenches for quick change of
mandrel/nosepiece sets allowing immediate operation of
riveter with all sizes