GLOBAL LINK Ultra E Lock User Instructions
  1. Manuals
  2. Brands
  3. GLOBAL LINK Manuals
  4. Locks
  5. Ultra E Lock
  6. User instructions

GLOBAL LINK Ultra E Lock User Instructions

Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

The Global Link Ultra E Lock features:
Convenient handle design, available in both right- and left-handed models
Illuminated keypad for keyless entry
Beep feedback indicating success and failure of actions as well as low battery conditions
Easy installation in standard door cutouts and direct replacement for standard travel
trailer entrance locks from:
FIC / Wesco
Bauer
TriMark
Support for two access codes—a factory default code and a customer code
Interior safety release button for emergency exit
Customer key access for alternative operation of the lock
Can be keyed-alike to match other Pro Series locks
The lock is powered by a single Type 123 lithium battery and operates with a 4-digit code. Each
lock has a factory default code that can be used at any time and cannot be erased; 1 additional
customer code can be added.
Important: Before using the lock, record the default 4-digit code printed on a label affixed to the
inside handle of the lock. The factory default code is needed for keyless entry before a customer
code has been added and to program / reprogram the customer code.
Figure 1: Global Link Ultra E Lock
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov.
March 2019
Ultra E Lock User Instructions
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ultra E Lock and is the answer not in the manual?

Questions and answers

Related Manuals for GLOBAL LINK Ultra E Lock

Summary of Contents for GLOBAL LINK Ultra E Lock

  • Page 1 Ultra E Lock User Instructions The Global Link Ultra E Lock features:  Convenient handle design, available in both right- and left-handed models  Illuminated keypad for keyless entry  Beep feedback indicating success and failure of actions as well as low battery conditions ...

  • Page 2: Locking And Unlocking

    Global Link Ultra E Lock Instructions Locking and Unlocking The lock supports both keyless and keyed operation. Important: It is recommended to lock the deadbolt during transportation for added security. Using the Keypad To lock the door: 1. Press any key to wake up the keypad.
  • Page 3 Global Link Ultra E Lock Instructions Programming the Customer Code A 4-digit code is required for keyless locking and unlocking from the outside of the door. The lock supports 2 codes—the factory default code and a customer code. The factory default 4-digit code is preprogrammed and cannot be erased. This code can be found on a label affixed to the inside handle of the lock.

  • Page 4: Changing The Battery

    Global Link Ultra E Lock Instructions Changing the Battery The lock is powered by a single Type 123 lithium battery and indicates low battery power by:  a flashing LED on the inside of the lock when the keypad is activated ...

  • Page 5: Installing The Lock

    Global Link Ultra E Lock Instructions Installing the Lock The Global Link Ultra E Lock fits:  hole cutouts from 2 1/2" x 3 5/8" to 3" x 4" Recommended: 2 3/4" x 3 3/4"  door thicknesses from 1 1/4" to 1 1/2" (most standard RV doors) Note: Installation videos can be found at cpgbrands.com.
  • Page 6 Global Link Ultra E Lock Instructions 4. Connect the cable attached to the interior lock housing to the cable attached to the exterior lock housing. Refer to the figure and position the cable inside the door as shown to avoid pinching and binding.
  • Page 7 Global Link Ultra E Lock Instructions 5. Refer to the figure and position the interior lock assembly on the door, ensuring:  The deadbolt post is inserted in the red deadbolt lever so that the lever operates the deadbolt. ...

  • Page 8: Troubleshooting

    Global Link Ultra E Lock Instructions Troubleshooting Issue Possible Causes Solution Customer code does not lock or Code is incorrect Confirm the correct code or use unlock the door the factory default code. Key was not pressed to wake the...

Table of Contents