Advertisement
DFR9000
Quick Install Guide
Preparation
10 cm
5 cm
10 cm
• Insert batteries in remote
• Place set.
control.
Menu navigation
1
4
Switch on receiver and TV.
Press SYSTEM MENU to open
Select A/V input on TV.
system menu.
2
Use SELECT to select RECVR.
3
Use source selection buttons
to select A/V source.
OSD language selection
1
Use 4 to select 'Config. ' .
2
Use 4 to select 'Language'.
Confirm with OK.
Confirm with OK.
3
Use 2 to select language.
Confirm with OK.
Speaker volume
1
Use 4 to select 'Balance'.
2
Use 2, 1, 4 and 3 to set
Confirm with OK.
speaker volume for all speakers.
Confirm with OK.
Note: For more detailed information on preparation and setup of your DFR9000 see chapters 4 'Installation', 5 'System menu and 6 'Setting up the receiver'
of the Instructions for Use.
2.
Preparation and setup
DFR 900 0 DIGI TAL SUR ROUND RECEIVE R
SOURCE
5 cm
STANDB Y-ON
CD IN
CD-R IN
AUX IN
PULL TO OPE N
• Connect to the mains.
• Switch on set.
5
Use 3 and 4 to select
7
Use 2, 1, 4 and 3 to select
submenus.
sub menu items and settings.
6
8
Confirm with OK.
Confirm with OK.
9
Press SYSTEM MENU to close
the system menu.
Speaker size and distance
1
Use 4 to select 'Speakers'.
2
Use 2, 1, 4 and 3 to set
Confirm with OK.
speaker size and distance for all
speakers. Confirm with OK.
Reassigning input sockets*
1
Use 4 to select 'A/V input'.
2
Use 4 and 3 to A/Vsource
Confirm with OK.
(e.g. CD Audio).
Confirm with OK.
3
Use 1 and 2 to select input
socket for this source
(e.g. GAME IN).
Confirm with OK.
*
Only necessary if you wish to connect a device for which no socket(s)
is/ are preassigned.
3
DFR9000
Playback
OK
SYSTEM MEN U
+
+
1
Use SELECT to select RECVR.
2
Switch on receiver and source.
3
Use source selection buttons
to select source.
4
Start playback on source.
Tuning to
radio stations
(FM, FM-M, MW)
1
Use SELECT to select RECVR.
2
Use TUNER to select tuner.
3
Keep ∞ or § pressed for
about 1 second, then release.
4
Press ∞ or § again to
interrupt searching.
Storing DAB radio stations
1
Press SELECT to select RECVR.
2
Use TUNER to select DAB.
Note: For more detailed information on operating your DFR9000 see chapters 7 'Operating the amplifier' and 8 'Operating the tuner'
of the Instructions for Use'.
Quick Install Guide
• Use the sound control buttons
to adjust the sound.
• Use SURROUND to select
surround modes.
Storing preset radio stations
1
3
Use 4 to select 'Autoprogram'.
Press SYSTEM MENU to open
Enter with 2.
the system menu.
2
Use 4 to select 'Tuner'.
4
Use 3 and 4 to select the
Enter with 2.
station number from which
onwards radio stations will be
stored. Confirm with OK.
> Storing preset radio stations
may take several minutes.
3
5
Use 4 to select 'Dab scan'.
Press SYSTEM MENU to open
the system menu. Enter with 2.
6
Press OK (7) to select 'New'.
4
Use 4 to select 'Tuner'.
> Storing DAB radio stations may
Enter with 2.
take several minutes.
4
3.
Operation
Tuning to preset
radio stations
• Use 2, 1, 4 or 3 to select
preset radio stations.
Tuning to DAB
radio stations
• Press 1 or 2 to select preset
DAB radio stations.
3103 305 2051.1
Advertisement
