Page 3
The reproduction and distribution of the documentation and software supplied with this product and the use of its contents is subject to written authorization from devolo. We reserve the right to make any alterations that arise as the result of technical de- velopment.
Magic! te, the device connector, as well as the icons used In no time at all, devolo Magic transforms your on the package: house into a multimedia home that is ready for the future today.
1.2 Intended use manufacturer/distributing company uses the CE marking to Use devolo products, devolo software and the pro- declare that the product meets all vided accessories as described to prevent damage applicable European regulations and injury.
Page 8
EU, Switzerland and Norway. downloadable programs approved and available on devolo AG's website (www.devolo.com) and in * The only exceptions are devolo outdoor products, which are suited for the outdoor use thanks to their IP certification. stores (iOS Google Play).
9 Preface 1.3 CE Conformity the devolo device from the mains supply by pulling it or its plug out of the electrical socket. Then con- This product complies with the technical tact qualified specialist personnel (after-sales ser- requirements of the directives 2014/53/ vice) exclusively.
Slots and If you have any further ideas or suggestions related openings on the housing are used for ventilation: to our products, please don't hesitate to contact us at support@devolo.com!
2.1 devolo Magic Be inspired by products that are astonishingly easy to install, with impressive, innovative technology Home is where devolo Magic is – in no time at all, and unbeatable performance. devolo Magic transforms your house or flat into a...
Two antennas cover the 2.4 Wi-Fi frequencies. lings and walls. Air-time fairness – Quicker Wi-Fi devices take To set up a devolo Magic network, you need at priority in the network. least two devolo Magic devices. For technical Roaming – Quickly and seamlessly connect to...
Page 13
Efficiency– The integrated PowerSave mode reduces energy consumption automatically at low data traffic. 1 network connector devolo Magic 1 WiFi mini connect stationary network devices—such as a game console, TV or media receiver—to your Internet access point over the Powerline network (e.g.
Page 14
Introduction 14 The devolo Magic 1 WiFi mini features A Powerline button (house symbol) with LED status display, A Wi-Fi button with LED status display, Two internal Wi-Fi antennas, One network connector, A Reset button (small opening next to the net- work jack).
Expanding an existing devolo Magic Powerline network by adding another devolo Magic adapter In order to use a new devolo Magic 1 WiFi mini in your devolo Magic- network, first you have to connect it to your existing devolo Magic adapters devices as a network.
Page 16
Introduction 16 After a short time, the flashing LED beco- mes a steady white light. The devolo Magic adapter has been successfully integrated into your existing devolo Magic network. You can find detailed information about instal- ling devolo Magic adapters in Chapter 3.3 Connecting the devolo Magic 1 WiFi mini.
17 Introduction 2.3.1Reading the Powerline indicator light The integrated Powerline indicator light (LED) shows the status for the devolo Magic 1 WiFi mini by illuminating and/or flashing: Flashing Meaning LED status display haviour (web interface*) Red LED Lights up for...
Page 18
The other network nodes are in standby mode and cannot currently be accessed over the mains supply. The PLC LEDs of the other devolo Magic adapters flash white only for a short time. Status 2: The connection to the other network nodes has been interrupted.
Page 19
White Lights up stea- The devolo Magic connection does not have Can be disabled any issues and the devolo Magic adapter is ready to operate. White Flashes at in- The devolo Magic adapter is in standby mo- Can be disabled tervals de.***...
** Information on improving the transmission rate WPA2. The default Wi-Fi key for the initial can be found in Chapter 5.2 Bandwidth optimi- installation of the devolo Magic 1 WiFi mini is the zation. device's Wi-Fi key. You will find the unique key on ***A devolo Magic adapter switches to standby the label on the back of the housing.
Page 21
Before the networking procedure, write down WPS is one of the encryption standards deve- the Wi-Fi key of the devolo Magic 1 WiFi mini. loped by the Wi-Fi Alliance. The objective of You can find the device's unique key on the la- WPS is to make it easier to add devices to an exi- bel on the rear side of the housing.
Introduction 22 2.3.3Reading the Wi-Fi indicator light The integrated Wi-Fi indicator light (LED) shows the status of the devolo Magic 1 WiFi mini by illu- minating and/or flashing Wi-Fi-LED Flashing behavior Meaning LED status display (web interface*) White LED Flashes at intervals...
2.3.4Reset button 2.3.5 Network jack The Reset button (small opening next to the net- You can use the network jack on the devolo Magic work jack) has two different functions: adapter to connect it to stationary devices such as computers, game consoles, etc. using a standard Restart network cable.
This chapter tells you everything you need to know 2 devolo Magic 1 WiFi mini to set up and use your devolo Magic 1 WiFi mini. We describe how to connect the device and briefly 1 devolo Magic 1 LAN describe the devolo software that comes with it.
In the following sections we describe how to Connect the devolo devolo Magic 1 WiFi mini connect the devolo Magic 1 WiFi mini and integra- to the network connection of your computer or te it into a network. We clarify the exact procedu- another network device using a network cable.
If the LEDs light up white on both another devolo Magic 1 WiFi mini devolo Magic adapters, the new adapter Before you can use the devolo Magic 1 WiFi mini in has been successfully integrated into your your devolo Magic network, first you have to existing devolo Magic network.
Installing devolo Cockpit software existing Wi-Fi network devolo Cockpit finds all accessible devolo Magic To ensure that the devolo Magic 1 WiFi mini has adapters in your devolo Magic network, displays the same Wi-Fi configuration as your Wi-Fi router, information about these devices and encrypts your you can apply the Wi-Fi access data at the touch of devolo Magic network individually.
Magic adapter at tion – Expanding an existing Powerline network home over Wi-Fi. by adding another devolo Magic 1 WiFi mini. Download the devolo Home Networking App to your smartphone or tablet computer from the corresponding store.
IP address and starts the configuration in the web browser. The devolo Magic 1 WiFi mini has a built-in web in- By default, the web interface will open direct- terface that can be called up using a standard web ly.
Page 30
X icon: The operation is being cancelled. Your settings are not being saved. Required fields Fields with a red border are required fields. This means entries must be made in these fields to con- tinue with the configuration. devolo Magic 1 WiFi mini...
Page 31
You can make changes within a table by clicking the corresponding table row in Time Control and Parental Control. In edit mode, the corresponding table rows have a blue background. In edit mode, the corresponding table rows have a blue background. devolo Magic 1 WiFi mini...
You can view status information for a wireless net- The Overview area shows the status of the work such as frequency channels in use, SSIDs in devolo Magic 1 WiFi mini and the connected LAN, use and connected Wi-Fi devices here. Powerline (PLC) and Wi-Fi devices.
Page 33
33 Network configuration You can see status information for a cable-based network such as protocol information or the connection speed of the Ethernet port, etc. here. devolo Magic 1 WiFi mini...
You can see the current status of your Wi-Fi net- work configuration here, e.g. the connected Wi-Fi stations, the MAC address, the selected frequency band, the SSID, the transfer rates and the connecti- on duration. devolo Magic 1 WiFi mini...
Keep in mind that after saving this set- ting, you will be disconnected from any existing wireless connection to the devolo Magic 1 WiFi mini. In this case, configure the device over Ethernet. Network name The network name (SSID) determines the name of your wireless network.
Page 36
SSID poses problems, first try to set The channel selection default setting is Automatic. up the connection with a visible SSID and only devolo Magic 1 WiFi mini regularly then try to hide it. automatically executes the channel selection in this setting.
Internet access but local network. without giving away the password for your Wi-Fi, you can set up a separate guest account in addition to the main Internet connection. The guest ac- Wi-Fi Guest network devolo Magic 1 WiFi mini...
4.4.4 Mesh Network name Mesh Define the name of the guest network in the Net- All devolo Magic series WiFi adapters offer mesh work name field. Wi-Fi, which entails completely new and improved Wi-Fi functions: Fast roaming (IEEE 802.11r) streamlines the...
Page 39
WiFi bottlenecks. In order to turn the mesh functions on, activate the Enable option. The mesh function of the devolo Magic 1 WiFi mini is switched on by default. Mesh WiFi Fig 9 Mesh WiFi...
Page 40
WiFi Clone makes it possible to simply copy the Wi-Fi password) to be applied. Wi-Fi configuration data of an existing Wi-Fi access point (e.g. your Wi-Fi router) to all Wi-Fi access points (Single SSID). Start the procedure with the WiFi Clone devolo Magic 1 WiFi mini...
41 Network configuration 4.4.5Schedule control The Schedule control area lets you define when and if your WiFi is switched on and off. Wi-Fi schedule control devolo Magic 1 WiFi mini...
(System Management Time Server (NTP)) In order to be able to use time control, activate the for the devolo Magic 1 WiFi mini ac has to be Enable option. enabled and an active Internet connection is also Configuration required.
Page 44
Confirm your settings by clicking the Disk icon. If you want to delete a time quota (time limit) or a time period from the list, click/touch the dustbin icon. devolo Magic 1 WiFi mini...
Alliance for easily and quickly setting up a secure In order to be able to use WPS encryption, activate wireless network. The encryption keys of the re- the Enable option. spective Wi-Fi devices are transmitted automatical- devolo Magic 1 WiFi mini...
Page 46
Network configuration 46 The devolo Magic 1 WiFi mini offers two different Use of the WPS method implies the use of the variants for transmitting these encryption keys: WPA/WPA2/WPA3 encryption standard. Therefore take note of the following automatic WPS using WPS pushbutton...
Network configuration 48 4.5 Powerline Make all changes to your Powerline network in the Powerline area. Powerline overview devolo Magic 1 WiFi mini...
Page 49
Pairing – Establishing a Powerline connection list of available and established connections (see Chapter 4.5 Powerline). In order to use a new devolo Magic 1 WiFi mini in your devolo Magic network, first you have to Pairing – Using custom password...
Page 50
Device ID: Device ID (number) of the respective Signal transmission profiles: devolo Magic adapter in the devolo Magic net- work Full power MAC address: MAC address of the respective...
51 Network configuration 4.6 LAN IPv4/IPv6 Depending on how the devolo Magic 1 WiFi mini You make changes to the network settings in the is connected to the Internet (IPv4 or IPv6), current LAN area. network information is displayed, such as Address, Subnet mask, Standard gateway and DNS server.
Page 52
DHCP server option ensure that devolo Magic 1 WiFi mini automatically receives an address from it. If you want to assign a static IP address, make entries accordingly for the Address, Subnet mask, Default gateway and DNS server fields. Confirm your settings by clicking the Disk icon.
Under Change password, a login password can be set for accessing the web interface. By default, the built-in web interface of the devolo Magic 1 WiFi mini is not protected by a password. We recommend assigning a password when installation...
Page 54
Enable Powerline button or Enable work interface and if Wi-Fi is disabled. Wi-Fi button option. In this mode, the devolo Magic 1 WiFi mini is not The operating buttons are enabled in the accessible over the Powerline network. As soon as devolo Magic 1 WiFi mini factory default settings.
Select a suitable file via the Browse ... button and start the operati- on by clicking the Restore button. Resetting the device configuration The devolo Magic 1 WiFi mini is reset to the origi- nal factory defaults in the System Configurati- on area with the Factory Settings option.
If you have downloaded an updated firm- The devolo Magic 1 WiFi mini automatically ware file for the devolo Magic 1 WiFi mini to updates its firmware. The option is enabled by your computer, navigate to the System default.
57 Network configuration 4.7.5Config Sync Config Sync allows settings to be configured uni- formly for all devolo Magic devices in the network. This includes the following settings e.g.: Wi-Fi network Guest network Mesh WiFi Time control and time server settings.
"connection rules": Security 128 Bit AES Plug the devolo Magic 1 WiFi mini directly into Device port 1x Ethernet RJ45 a wall socket. Avoid using power strips. This Power consumption Maximum: 7.7 W...
Contact your mu- 2432 MHz nicipal government to find out the address and hours of the nearest collecti- 2437 MHz on point. 2442 MHz 2447 MHz 2452 MHz 2457 MHz 2462 MHz 2467 MHz 2472 MHz devolo Magic 1 WiFi mini...
61 Appendix 5.6 Warranty conditions If your devolo device is found to be defective du- ring initial installation or within the warranty peri- od, please contact the vendor who sold you the product. The vendor will take care of the repair or warranty claim for you.
Page 62
27 DHCP server 51 Safety notes 9 Disposal of old devices 60 SSID 36 Starting up a new devolo Magic network 15 Expanding an existing devolo Magic network 15 System requirements 24 Factory default settings 23 Time server 54...
Need help?
Do you have a question about the Magic 1 WiFi mini and is the answer not in the manual?
Questions and answers