Press once to allow the aircraft to exit from TapFly, ActiveTrack and other intelligent USB Port flight mod s. USB device support. C1 Button Customizable through the DJI GO 4 app. C2 Button [23] [22] Customizable through the DJI GO 4 app. Power Port Connect to the Charger to charge the battery of the Remote Controller.
RTH status. Camera Settings Dial [15] [16] Turn the dial to adjust camera settings. (Only functions when the remote controller is connected to a mobile device ru ning the DJI GO 4 app.) [14] [10] [13] ntelligent Flight Pause Button...
Phantom 4 Pro / Pro+ Use Manua C1 Button Customizable through the DJI GO 4 app. C2 Button [18] [17] Customizable through the DJI GO 4 app. Power Port Connect to the Charger to charge the battery [19] of the remote controller.
Page 16
Smart RTH Use the RTH button on the remote controller or tap the RTH button in the DJI GO 4 app and follow the on- screen instructions when GPS is available to initiate Smart RTH. The aircraft will then automatically return to the last recorded Home Point.
Page 31
Phantom 4 Pro / Pro+ Use Manua DJI Intelligent Flight Battery The DJI Intelligent Flight Battery has a capacity of 5870 mAh, a voltage of 15 2 V, and a smart charge/ discharge functionality. It should only be charged using an appropriate DJI approved charger.
Turn on the Phantom 4 Pro / Pro+ and connect a USB cable to the Camera Data Port to download photos and videos to a computer. The camera Micro SD card cannot be read when DJI Assistant 2 is being used.
7. Ensure that the sensors for the Obstacle Sensing System are clean. Calibrating the Compass Only calibrate the compass when the DJI GO 4 app or the status indicator prompt you to do so. Observe the following rules when calibrating your compass: DO NOT calibrate your compass where there is a chance of strong magnetic interference, such as magnetite, parking structures, and steel reinforcements underg ound.
Use auto takeoff only if the Aircraft Status Indicators are blinking green. Follow the steps below to use the auto takeoff feature: 1. Launch the DJI GO 4 app, and enter “Camera” page. 2. Complete a steps on the pre-flight checklist.
After-Sales Information Visit the following pages to learn more about After-sales policy and warranty information: 1. After-sales Policy: http://www.dji.com/service 2. Refund Policy: http://www.dji.com/service/refund-return 3. Paid Repair Service: http://www.dji.com/service/repair-service 4. Warranty Service: http://www.dji.com/service/warranty-service Compliance Information FCC Comp ance Not ce This device complies with Part 15 of the FCC Rules. Operation is subject to the following tw conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 67
Una copia della dichiarazione di conformità UE è disponibile online all'indirizzo Web www.dji.com/euro- compliance Déclaration de conformité UE : Par la présente, SZ DJI TECHNOLOGY CO., LTD déclare que cet appareil est conforme aux principales exigences et autres clauses pertinentes de la directive européenne 1999/5/ Une copie de la déclaration de conformité...
Need help?
Do you have a question about the PHANTOM 4 PRO+ and is the answer not in the manual?
Questions and answers