Wired Network Connection - Yamaha Disklavier ENSPIRE DKC-900 Owner's Manual

Wired Network Connection

If your wireless router (access point) does not support WPS, you can connect
this product to a wireless router (access point) using an Ethernet cable.
1
Press the [P] (Standby/On) button to turn the power off.
2
Connect the wireless router (access point) to the [LAN] port
on the control center unit using an Ethernet cable.
Control center unit
Ethernet cable
3
Enable the DHCP server function on the wireless router
(access point).
4
Press the [P] (Standby/On) button to turn the power on.
Connection between this product and the wireless router (access point)
is automatically established in approximately 15 to 20 seconds.
5
Open the Wi-Fi setting screen on your smart device.
6
Enable the Wi-Fi function.
7
From the displayed network list, tap the network to which
this product is connected.
If necessary, enter a password, and then connect.
Wireless router
(access point)
Getting Started
Note:
To ensure proper security, when
connecting this product to the
Internet, be sure to connect via a
router, etc.
Set an appropriate password for the
router, etc. being used.
Do not connect directly to the
communication circuits (including
public line LAN) of the
telecommunications carriers (mobile
telecommunication companies,
fixed-line telecommunication
companies, Internet providers, etc.).
Note:
For details on the DHCP setting, refer
to the owner's manual supplied with
your wireless router (access point).
Note:
For details on the Wi-Fi setting,
refer to the owner's manual supplied
with your smart device.
Chapter
2
23