Find the correct viewing
channel
1
Press
to turn on the Home Theater
System.
2
Press DISC to switch to disc mode.
3
Turn on the TV and switch to the correct
video-in channel in one of the following
ways:
•
Go to the lowest channel on your
TV, then press the Channel Down
button until you see the Philips
screen.
SOURCE button repeatedly
•
Press
on the remote control of your TV.
Tip
•
The video-in channel is between the lowest
and highest channels and may be called
FRONT, A/V IN, VIDEO, HDMI etc. See the
TV user manual on how to select the correct
input on the TV.
Select menu display language
General Setup
Disc Lock
Display Dim
OSD Language
Screen Saver
Sleep Timer
DivX(R) VOD Code
1
Press DISC .
2
SETUP .
Press
» [General Setup] menu is displayed.
3
Press .
English
Melayu
Русский
ไทย
4
Press
to select [OSD Language] in
the menu, then press .
•
The language options are different
depending on your country or
region. It may not correspond to the
illustration shown here.
5
Press
to select a language, then press
OK .
Tip
•
You can set the default language for DVD disc
menu (see 'Adjust settings' > 'Preferences' >
[Disc Menu] ).
Turn on Progressive Scan
If the TV supports progressive scan output, you
can connect this Home Theater System and the
TV using component video connection. (see
'Connect video cables' > 'Option 2: Connect to
the component video jack').
Video Setup
TV System
TV Display
Progressive
Picture Setting
1
Turn on the TV and ensure that the TV
progressive scan mode is deactivated (see
the TV user manual).
2
Switch the TV to the correct viewing
channel for this Home Theater System.
3
Press DISC .
4
SETUP .
Press
5
Press
to select [Video Setup] in the
menu, then press .
On
Off
EN
15