Mi Casa Verde VERALITE Quick Start Manual

http://waterheatertimer.org/How-to-wire-Intermatic-CA3750.html
THANK YOU
FOR PURCHASING VERALITE BY MI CASA VERDE!

TO GET STARTED

Connect the network and power as labeled in the diagram below. Wait up to 2 minutes for the
Power, Ready, and Network lights to come on solid, without blinking. When the lights are on,
visit http://micasaverde.com/setup
VeraLite. If your computer and VeraLite both have internet and are both on the same network,
you will automatically be redirected to Vera's web page to start setting up and using VeraLite.
ADDING AND REMOVING Z WAVE DEVICES
Generally VeraLite must be within 3 feet (1 meter) to the Z-Wave device you want to add or
remove. If it is convenient to bring the device near VeraLite, you can leave VeraLite plugged in,
and press the '+' button when the 'Power' and 'Ready' lights are on solid. If it is not easy to bring
the device to VeraLite, then disconnect any cables from VeraLite. Ensure that 4 AA batteries are
properly inserted in Vera's battery compartment and press the 'battery' button to power Vera
by its batteries making Vera portable. Wait up to 1 minute and when you see the 'Ready' light
start blinking, you can start adding devices.
TO ADD A DEVICE, Vera's 'Ready' light must be blinking slowly, once per second. You must
activate the device's 'inclusion' or 'pair' mode. Consult the device's user manual for instructions.
For light switches and plugin modules this is generally done by turning the light on or o .
While Vera is busy adding the device the 'Ready' light will go out, and when Vera has nished
added a device, the 'Ready' light will utter rapidly for 2 seconds to let you know. Once it starts
blinking slowly again, you can add the next device. If you cannot get a device to add, follow the
instructions to remove or reset the device, and then try to add it again. Once you have nished
adding a device, click the '+' button again to exit include mode and save your changes.
using a web browser that is on the same home network as
Connect to Connect to
Internet Power
USB WAN POWER
Power
Ready
Error
Network