Advertisement
Read all instructions before assembling crib.
Save instructions for future use.
Adult assembly required.
Small parts may present choking hazard prior to assembly.
Enclosed please find simple step-by-step instructions to help
you quickly assemble your products.Before you begin we
recommend that you following the steps below:
1.Please read the instructions thoroughly.
2. Identify all parts and hardwares
3.You will need the following tools:
Philips head screw driver
Flat head screw driver Hammer
Do Not Use Power Drills or Drivers
To protect your parts during assembly please place them on a
soft surface.
To clean surface use only water on a damp cloth. Do not use
window cleaners or cleaning abrasives as it will scratch the
surface and could damage the protective coating.
STYLE NO: 678
1
DREAM ON ME INC.
125 HELEN STREET
S.PLAINFIELD NJ 07080
908-791-0555
MADE IN CHINA
Advertisement
Table of Contents
Related Manuals for Dream On Me 678
Summary of Contents for Dream On Me 678
- Page 1 DREAM ON ME INC. 125 HELEN STREET S.PLAINFIELD NJ 07080 STYLE NO: 678 908-791-0555 Read all instructions before assembling crib. Save instructions for future use. Adult assembly required. Small parts may present choking hazard prior to assembly. Enclosed please find simple step-by-step instructions to help you quickly assemble your products.Before you begin we...
- Page 2 PARTS OR SHARP EDGES BEFORE AND AFTER ASSEMBLY.A FREQUENT CHECK SHOULD BE MADE DURING USE.DO NOT USE CRIB IF ANY PARTS ARE MISSING,DAMAGED OR BROKEN.CONTACT DREAM ON ME INC.125 HELEN STREET S.PLAINFIELD,NJ 07080 FOR REPLACEMENT PARTS AND INSTRUCTIONAL LITERATURE IF NEEDED.DO NOT SUBSTITUTE PARTS.
- Page 3 CONNECTION HARDWARE (g) Allen wrench (1PC) (a) 2-1/8" Bolt (24PCS) (h) Washer (2PCS) (b) 3 " Bolt ( 4 PCS) (i ) Screw (2PCS) (c) 5/8" Bolt (4PCS) ( j ) Belt (1PC) (d) Barrel nut (28PCS) ( e ) Wood dowel (8PCS) (k) Tip over restraints (1PC) ( f ) Wood dowel (4PCS) PHILLIPS--HEAD SCREWDRIVER REQUIRED...
- Page 4 PARTS ENCLOSED IN CARTON (C) Changer top rail (2PCS) (D) Changer shelf support (6PCS) (A) Changer left side (1PC) (E) Changer middle rail (1PC) (F) Changer shelf (3PCS) (G) Crib left headboard (1PC) (H) Crib side rail (2PCS) (J) Metal spring support (K) Changer pad (1PC) platform (1PC)
- Page 5 (B1) Changer back leg (1PC) (B2) Changer front leg (1PC) (B3) Changer langer top rail (1PC) (B4) Changer langer middle rail 1(1PC) (B5) Changer langer middle rail 2 (1PC) (B6) Changer langer bottom rail(1PC) STEP 1 se allen wrench (g) to connect bolts. changer langer top rail (B3), Connect changer langer middle rail 1(B4),...
- Page 6 STEP 2 Use allen wrench (g) to connect bolts. Connect changer top rail (C) to changer left side (A) by using wood dowel ( e ),barrel nut (d ) and 2-1/8”bolt (a). Connect changer shelf support (D) to changer left side (A) by using barrel nut (d) and 2-1/8”...
- Page 7 STEP 4 (B) to the assembled the assembled parts of STEP 1 Assemble parts of STEP 3 use the same way as shown in STEP 2. CHANGER...
- Page 8 STEP 5 Use allen wrench (g) to connect bolts. Connect crib side rail (H) to the assembled parts of STEP 4 and crib left headboard (G) by using barrel nut (d) and 2-1/8” bolt (a). STEP 6 Locate the metal spring support platform (J) with tabs.
- Page 9 STEP 7 Assemble crib side rail (H) to the assembled parts use the same way as shown in STEP 5. STEP 8 1. Assembly the belt (j) to the changer side (A&B) using washer (h) and screw (i). 2. Add the changer pad (K). 3.
- Page 10 STEP 9...
- Page 11 FURNITURE TIPPING DETERRENT HARDWARE HOW TO LOCK Tipping furniture may injure young children. Use of this tipping restraint hardware is highly recommended. When properly instated this hardware could provide protection against the unexpected tipping of furniture due to improper use. WARNING This hardware is only a deterrent.Adult supervision is the only proper deterrent to prevent improper use of any potentially hazardous product.
Need help?
Do you have a question about the 678 and is the answer not in the manual?
Questions and answers