Advertisement
7.7.3 Self tapping screw fix the pre-assembled roof panel from 7.4.
7.7.4
With the shed located centrally about the plinth slab, position the 6 anchor steel angles. M8 machine screw
fix to internal compartment. This will require "spotting" and drilling 8mm diameter holes through to shed
panels. Spot through holes to plinth slab, remove anchor angles and masonry drill slab for anchor bolts. NB!
Anchor bolts and M8 machine screws are supplied, see "FITTINGS PACK".
7.7.5 Insert anchor bolts, re-fit steel angles and anchor shed to plinth slab.
7.7.6 Self tapping screw fix the 2 mid height wall brace brackets item 72.
© Jack Sealey Limited
Original Language Version
GSS150819SL
Issue: 1 - 30/08/12
Advertisement
