IPC Gansow CT40 Operating & Care Manual

IPC Gansow CT40 Operating & Care Manual

Pedestrian scrubber drier

Advertisement

PEDESTRIAN SCRUBBER DRIER CT40
40 litre solution tank
50 litre recovery tank
45 cm (18") 50 cm (20")
55 cm (22") scrub widths.

MACHINE OPERATION

1. Fill Solution Tank.
2. Ignition Switch On
3. Lower Brush Head by Foot
Pedal. Press Down & to Left
4. Lower Squeegee
5. Select Forward Traction
6. Open Solution Flow Lever
Operating & Care Guide
LED Display
Ignition Switch/Stop
Potentiometer (Speed)
Forward/Reverse
Brush Start/Stop
Vacuum Start/Stop
Battery Level Indicator
Recovery Tank Full
Solution Tank Empty

DAILY CARE

1. Drain Recovery Tank
2. Flush Recovery Tank with Clean
Water & Wipe Off Float Switch
3. Remove Vacuum Filter & Wash
with Clean Water.
4. Remove Squeegee Assembly &
Clean – Ensure Blades are Clean
and Edges are
'Sharp'
5. Remove Brushes or Pads & Clean.
Solution Flow
From Centre of
Brush.
6. Wipe Down Machine
7. Charge Batteries – On Board
or External Charger 24v x 20A.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CT40 and is the answer not in the manual?

Questions and answers

Summary of Contents for IPC Gansow CT40

  • Page 1 PEDESTRIAN SCRUBBER DRIER CT40 Operating & Care Guide LED Display Ignition Switch/Stop 40 litre solution tank Potentiometer (Speed) 50 litre recovery tank Forward/Reverse 45 cm (18”) 50 cm (20”) Brush Start/Stop 55 cm (22”) scrub widths. Vacuum Start/Stop Battery Level Indicator...
  • Page 2 CT40BT55 Pad Holder = 1 x 505 mm Dia. Daily. Single disc models have auto brush on/off For full operating instructions, please refer to the IPC Gansow Operator Handbook. If you require further information or assistance, please contact:- IPC Gansow (UK)

Table of Contents

Save PDF