Wi-Fi Settings - D-Link DWR-921 User Manual

This section will help you to manually configure the wireless settings of your router. Please note that changes made in this section may also
need to be duplicated on your wireless devices and clients. The Wireless Settings page allows you to configure how your router connects to the
Internet. You can also set up a wireless connection to a device automatically or configure your router automatically through Windows by
clicking the Wi-Fi Protected Setup button. This is described in "Wi-Fi Protected Setup (WPS) page.
WLAN Interface: Select the WLAN partition to modify the settings (some models
support dual band).
Disable Wireless
Tick this box if you do not want the selected WLAN partition to
LAN Interface: be active.
Band: Select the Wireless Mode (802.11b/g/n) or mixed which includes
all the modes. Mixed is by default selected as this provide more
compatibility to older Wireless devices.
Mode: Select the operation mode for the Wi-Fi. Device supports AP,
Client, WDS and AP+WDS mode. Default is AP so all devices can
Connect.
MultipleAP: You can configure multiple SSID's when this option is clicked.
Network Type: You can change the WLAN type (only available on Client mode).
SSID: Set a name for the Wireless. This is to identify your network
among neighbouring wireless devices.
Channel Width: Select between 20MHz or 40MHz. If using 802.11n select
20/40MHz.
Control Sideband: Only available on 802.11n mode and when 40MHz is selected.
Channel Number: For optimal Wireless throughput and performance, it is
recommended to select non-interferential channels. Auto will
allow the device to automatically switch between channels
when interference is detected. (Channel 1, 6, and 11 is non-
overlapped channels).
Broadcast SSID: This option allows you to choose whether you want to hide your
wireless name or broadcast your wireless name. If the invisible
D-Link DWR-921 User Manual

Wi-Fi Settings

2