Oil level in engine
Calling up the engine oil level in the display (Standard onboard computer)
To check the engine oil level the vehicle must be parked on level ground and the engine must be at operating
temperature and must have been switched off for at least one minute.
If the engine oil level is called up earlier, the display will not show the correct quantity. If the engine oil level is
called up while driving, the display always shows the engine oil level measured the last time the engine was off.
Switch off engine.
Apply parking brake.
Turn vehicle key in steering lock to drive position.
Wait at least 1 minute.
Press control pad
If the display shows
oil level is too low by the displayed amount.
!
Only top up the engine oil when the display shows © with a yellow/red status indicator, see page 32.
Calling up the engine oil level in the display (Plus onboard computer)
To check the engine oil level the vehicle must be parked on level ground and the engine must be at operating
temperature and must have been switched off for at least one minute.
If the engine oil level is called up earlier, the display will not show the correct quantity. If the engine oil level is
called up while driving, the display always shows the engine oil level measured the last time the engine was off.
Switch off engine.
Apply parking brake.
Turn vehicle key in steering lock to drive position.
Wait about 1 minute.
Press control pad
The list of main menus appears in the display.
Press control pad
Press control pad
Press control pad
Press control pad
If the display shows
engine oil level is too low by the displayed amount.
!
Only top up the engine oil when the display shows
48
Guidelines for Breakdown Services (Subject to technical modifications)
i
è
repeatedly until the display shows
OEL ok
or
OIL ok
, the engine oil level is correct If the display shows
º
„
or
.
‚
ƒ
or
repeatedly until the
„
.
‚
ƒ
or
repeatedly until the
„
.
Oil level O.K.
, the engine oil level is correct If the display shows
OEL ok
or
OIL ok
Check Info
menu is highlighted.
Oil level
menu is highlighted.
©
with a yellow/red status indicator, see page 32.
or
2.5 l
.
2.5 l
, the engine
Oil level 3.5 l
, the
Need help?
Do you have a question about the Atego and is the answer not in the manual?
Questions and answers
flywheel torque settings