Table of Contents
Advertisement
- Select the Speed Unit
- Set Wireless Link Password
TIP:
You can reset the settings either by operating inside of the SETUP MENU, or by
restoring defaults.
You can switch the capitalization by Protect button when you set the Wireless Link
password.
From now on, the device will automatically turn on and start recording once power
has been made available from the 12 V outlet. Just start the vehicle and start driving!
- If there is no 12 V outlet or cigar lighter socket for your vehicle, use the included USB
power cord.
- DO NOT wire the device directly to the car cigar lighter socket or any 12 V outlet.
Doing so will result in permanent damage to the device.
- The device has a hardwire kit CA-DR1030(optional accessory)
that will directly connect to your vehicle's fuse box. This will allow you to have your
12 V outlet available for other use.
Please read carefully and follow the instructions below to help you operate the device
safely.
Select Speed Units
MPH
KMH
Press OK to continue.
Set Wireless Link Password
1 2 3 4 5 6 7 8
Press OK to continue.
20
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DRV-A501W and is the answer not in the manual?
Questions and answers
Had new windscreen, how do I reconnect the dash cam
To reconnect the Kenwood DRV-A501W dash cam after replacing the windscreen, follow these steps:
1. Reinstall the Dash Cam: Mount the dash cam securely on the new windscreen in the desired position.
2. Power On the Device: Ensure the dash cam is powered on and not recording.
3. Enter Wireless Link Mode: Long press the Wireless Link button on the device to enter connecting mode.
4. Open the Smartphone App: Launch the KENWOOD DASH CAM MANAGER app on your smartphone.
5. Connect to the Dash Cam: Press the "Connect" button in the app and select the dash cam from the network list.
6. Enter the Password: Input the Wireless Link password when prompted.
7. Complete the Connection: Once connected, press the "Continue" button to access the main screen of the app.
This process will restore the connection between your smartphone and the dash cam after reinstalling it on the new windscreen.
This answer is automatically generated