5
•
Turn the assembly upright.
•
Fit and "snap" the tabs on a wheel cap into the slots in the hub.
Repeat this procedure to attach the remaining wheel cap to the
other hub.
Pedal Axle Tab
6
•
Fit two pedal hubs onto the pedal axle tabs. Make sure the tabs
fit into the slot in each pedal hub.
•
Press the pedal hubs into the centre of the front wheel until they
are flush with the surface of the front wheel.
•
Repeat this procedure on the other side with the other two
pedal hubs.
Assembly
Front Wheel Assembly
Wheel Cap
W
7
•
Place the front wheel assembly between the fork arms. Make
sure the pedal axle fits into the groove at the bottom of each
fork arm.
•
Place a fork cover over the pedal axle on one fork arm.
•
Insert two M4,5 x 1,9 cm screws into the fork cover and tighten.
•
Repeat this procedure to attach the other fork cover to the other
fork arm.
Pedal Hub
Pedal Hub
8
•
With the fork covers facing the rear wheels, insert the fork post
up through the hole in the neck of the frame.
5
Fork Cover
Rear Wheels
Fork Arms
Groove
Pedal Axle
x 4
Fork Post
Fork Cover