Download Print this page

Advertisement

Quick Links

GE40/CR42 (MS-1492) Disassemble Guide
■ 1、BATTERY PACK
■ 2、HDD&ODD MODULE/BOTTOM DOOR
■ 3、THERMAL-KIT、DRAM MODULE
■ 4、CPU&WLAN MODULE
■ 5、SEPARATE UPPER CASE AND LOWER CASE
■ 6、LOWER CASE ASSY
■ 7、LCD MODULE ASSY

Advertisement

loading
Need help?

Need help?

Do you have a question about the GE40 and is the answer not in the manual?

Questions and answers

Summary of Contents for MSI GE40

  • Page 1 GE40/CR42 (MS-1492) Disassemble Guide ■ 1、BATTERY PACK ■ 2、HDD&ODD MODULE/BOTTOM DOOR ■ 3、THERMAL-KIT、DRAM MODULE ■ 4、CPU&WLAN MODULE ■ 5、SEPARATE UPPER CASE AND LOWER CASE ■ 6、LOWER CASE ASSY ■ 7、LCD MODULE ASSY...
  • Page 2: Battery Pack

    GE40/CR42 (MS-1492) Disassemble Guide 1、BATTERY PACK 1.1:Move the “Unlock’ button base on left picture shows; 1.2:Push the “Release” button and move the battery pack base on left picture. Component Battery Pack S9N-4362210-M47...
  • Page 3 GE40/CR42 (MS-1492) Disassemble Guide 2、HDD&ODD MODULE/BOTTOM DOOR 2.1:Remove the 2 screws (M2.5*5mm), then Remove the 2 screws (M2.5*6mm),last Remove the 2 screws (M3*3.5mm),remove the Bottom door. 2.5*5mm Attention: the screw driver touque is: 1.7-2.0Kgf-cm 3*3.5mm Component Bottom door 307-491J213-Y 31...
  • Page 4: Dram Module

    GE40/CR42 (MS-1492) Disassemble Guide 、 3、THERMAL-KIT DRAM MODULE 3.1: Push the two side shielding of DRAM as pic shows;. Component S7C-S56AD01-K37 DRAM Module 3.2:Remove the 2 screws(M2.5*5mm) and FAN cable, after that remove the Fan. Attention:the screw driver torque is 1.5-2.0Kgf-cm...
  • Page 5 GE40/CR42 (MS-1492) Disassemble Guide 4、CPU&WLAN MODULE :Open the CPU Slot with hexagonal screwdriver , then remove CPU Module as below. Component A13-22201G6-I06 4.2:Remove 1 screw(M2*3mm); then remove the two sides wireless card antenna as pic shows: Attention: the screw driver torque is: 1.8-2.0Kgf-cm...
  • Page 6 GE40/CR42 (MS-1492) Disassemble Guide 5、SEPARATE UPPER CASE AND LOWER CASE 5.1:Remove the Keyboard as pic shows. Componen S1N-2EUS291-SA0 Keyboard 5.2:Disconnect Keyboard Cable as pic shows.
  • Page 7 GE40/CR42 (MS-1492) Disassemble Guide 5、SEPARATE UPPER CASE AND LOWER CASE 5.3:Remove the 8 screws(M2.5*5mm); Attention: the screw driver torque is: 2.0-2.5Kgf-cm Component E43-1255001-H29 Screw 5.4:Remove lower case,then remove DC IN Module; Component K10-3006142-V03 DC IN 5.5:Remove the LVDS cable as pic shows:...
  • Page 8: Lower Case Assy

    GE40/CR42 (MS-1492) Disassemble Guide 6、LOWER CASE ASSY 6.1:Remove the MIC cable as pic shows: 6.2:Remove the Audio Board,Then Remove the Audio cable as pic shows. Component Audio 607-1492A-02S Audio Board 6.3:Draw Out Antenna and MIC Cable as pis shows.
  • Page 9 GE40/CR42 (MS-1492) Disassemble Guide 6、LOWER CASE ASSY 6.4:Remove the 1 screws (M2.5*5mm)and Remove the 1 screws (M2*3.5mm)that stabilize the left LCD hinge. Attention: the screw driver torque is 3.0-3.5Kgf-cm Component E43-1255001-H29 Screw E43-1203501-H29 Screw 6.5:Remove the 1 screws (M2.5*5mm)and Remove the 1 screws (M2*3.5mm)that stabilize the Right LCD...
  • Page 10 GE40/CR42 (MS-1492) Disassemble Guide 6、LOWER CASE ASSY 6.7:Remove the left Power cable. 6.8:Remove the Hall Switch cable. 6.9:Remove the Power board. Component Power board 607-1492B-01S...
  • Page 11 GE40/CR42 (MS-1492) Disassemble Guide 6、LOWER CASE ASSY 6.10:Remove the Hall Switch Board. Component Hall Switch Board 607-1492C-01S 6.11 : Disssemble the Speaker module,then Disassemble the speaker Cable. Component Speaker Module S33-A010142-F33 6.12:Remove Touchpad Module. Component Touchpad Module S78-3700630-E47 307-492C513-Y 31...
  • Page 12: Lcd Module

    GE40/CR42 (MS-1492) Disassemble Guide 7、LCD MODULE 7.1 : Remove the LCD bezel, should begin from downside to left side, then the upside to right side; Component 307-491B214-U22 LCD Bezel 7.2:Remove the 2 screws (M2*3mm),Remove LCD Panel. Attention: the screw driver torque is 3.0-3.5Kgf-cm...
  • Page 13 GE40/CR42 (MS-1492) Disassemble Guide 7、 LCD MODULE ASSY 7.4:Remove the 3 screws (M2*3mm); Remove the Right LCD hinge. Attention: the screw driver torque is 3.0-3.5Kgf-cm Component Screw E43-1203003-H29 Hinge R E2M-4920411-G60 7.5:Remove the 4 screws (M2*3mm); Remove the Left LCD hinge.
  • Page 14 GE40/CR42 (MS-1492) Disassemble Guide 7、 LCD MODULE ASSY 7.7:Remove the CMOS camera module according to the sequence as pic shows; Component S1F-0005120-B36 Camera Module...

This manual is also suitable for:

Cr42Ms-1492