Brake Adjustment - Viro Vega User Manual

Regularly examine all parts for wear or damage before use. Before inspecting, turn the unit "OFF," remove the charger plug and
make sure all components have cooled off before touching. Exercise caution around exposed parts.
If any parts require service or replacement, contact customer service or a reputable service center for motorized vehicles to make
necessary repairs. Modifying the unit without a qualified repair technician will void the warranty and could cause damage to the unit
and possible injury to the rider.

BRAKE ADJUSTMENT

Required 10mm wrench
Never ride the scooter if the brakes are not functioning properly.
1. Hold the gate spring and reserve a 2-3mm space. Firmly tighten the brake wire and tighten the rope nut (Fig. 1).
2. Loosen the trim nut to adjust the small brake space ( xed hex nut) to make the brake more sensitive (Fig. 2).
3. Tighten the adjusting screw to nely adjust the brake space to make the brake more sensitive (Fig. 3).
NOTE: DO NOT lubricate between the brake pad (belt holding belt) and the hoop.
FRAME AND HANDLEBAR
Before each ride, check for cracks or other damage to the frame, neck and handlebars. Damage to the frame is unlikely, but bending
or breaking the frame or handlebars can result from aggressive riding, like running into curbs and other objects. Always ride carefully,
and inspect the scooter before each use.
HARDWARE
Check all hardware such as bolts, nuts, cables, fasteners and other parts to ensure they are secure and properly assembled. If you hear
any rattling from loose parts, the unit is damaged and should not be used.
WARNING: Prolonged exposure to UV rays, rain and the elements may damage the enclosure materials.
Store indoors when not in use.
Should the unit need gentle washing due to large amounts of dirt or debris, please follow the cleaning directions below:
1
Prior to cleaning, always make sure the unit is OFF and the charger is unplugged.
2
Wipe clean with a soft cloth. DO NOT use harsh chemicals or abrasive scrubs to clean.
DO NOT use a high-powered water hose or expose the unit to excessive moisture or soap. Keep all water away from the
3
charging port and battery.
4
To keep your unit in good condition, wipe clean after every use.
Store the unit indoors at room temperature below 77˚F (25˚C) away from direct sunlight. Keep away from moisture, humid
5
environments, and harsh weather conditions. Cover the unit in its original packaging or under a covering to protect from
dust and debris.
6
Do not place anything on top of the unit while storing. Do not store on a high shelf to prevent it from rolling off.
Store the unit after it has been fully charged. Always make sure the unit is OFF when storing. Charge at least every month
7
when not in use to preserve the battery life.
Fig. 1 Fig. 2
10
Fig. 3