Hitachi HIDIC EH-150 Applications Manual page 17

3.3.2 Station address
The station address is the node address set by the rotary switched as described in chapter 3.2.2 .
Choose [Edit device] in the [Device database] menu , or Double-click on EH-IOCP icon.
3.3.3 Configuration data
In the DP slave configuration data, the user shall enter IO modules that are currently installed in the slave rack.
Click [Configuration data] of above "Select device" window.
Fig. 3.6 Edit device
Double click on this area, it is inputted to the table below.
Fig. 3.7 Configuration data
3-5
Chapter 3 CONFIGURATIONS
Set the station address