Page 1: Table Of Contents
GETTING STARTED WITH What is in the box II. Charge your device III. Power on for the first time IV. Download And Register with StanceBeam APP V. Connect your device with App VI. Calibrate the Sensor VII. Install Bat Mount and Sensor VIII.
Page 2: What Is In The Box
What is in the box Inside your StanceBeam Striker box you will have: a) The StanceBeam Striker - Smart Cricket Bat Sensor b) The Charging cradle c) Locking Key d) The Bat mount to connect your StanceBeam Striker to any cricket bat.
Page 3: Charge Your Device
Remove your device and charging cradle from packaging and Plug the charging dock into power adapter (not provided). b) Place your StanceBeam Striker on the cradle and lock it by rotating it clockwise. c) Cyan LED should start blinking when the device is in charging mode. It takes 2.5-3 hours to fully charge the device.
Page 5: Connect Your Device With App
V. Connect your device with App a) Power on device by pressing power button for 3 seconds. b) Click the device icon on app and the device name “StanceBeam” should appear in scan list. c) Select the sensor name on list.
Page 7: Calibrate The Sensor
VI. Calibrate the Sensor Once connected first time sensor needs to be calibrated. Calibration is required to do proper analytics of your swings. a) Click on Calibrate on pop up. b) Hold the device in your hand and rotate it as per the animation on the App. c) Click “Start”...
Page 8: Install Bat Mount And Sensor
VII. Install Bat Mount and Sensor a) Wrap the rubber mount on the top of the handle. Align the marking on the mount to the spine of the bat (back side). b) Hold the mount with one hand and tap at the top of the mount. Keep tapping till the surface plate touches the touches the top of the handle.
Page 10: Add Bat Details
VIII. Add Bat Details StanceBeam Analytics Engine requires bat details like length, weight to accurately calculate the speed, power and to better understand your technique. a) Click on plus icon in the Bat details. b) Select Brand, Model of the Bat you are using and enter name of your bat.
Page 11: Take Pitch Orientation
IX. Take Pitch Orientation Before you start session, you have to add the Pitch orientation (Direction) that is used by StanceBeam Analytics Engine to understand your technique. a) From home screen click on “Take Pitch Orientation”. b) Place the bat pointing towards the bowler end, parallel to the stumps and click “Take Pitch Orientation”.
Page 12 ! 1 2...
Page 13: Start Session
X. Start Session a) After connection to the Sensor, click on “Start Session”. b) Default Bat and Pitch Orientation selected in home screen is used. c) StanceBeam app is ready to capture your swings. ! 1 3...
Page 14 ! 1 4...
Page 15: End Session
XI. End Session Session can be ended by clicking the End button on button of the Live Screen. On clicking the button Pop up appears with options • Add Tag - You can tag session to easily recognise it later like “Cover Drive Session”. •...
Page 16: View Session Summary
XII. View Session Summary To view the summary of any session, select the session from the “Sessions” screen. Session Summary screen has following tabs: a) Summary - This gives the overall Max, Min and Average of all the features. b) Swings - List of the shots played. c) Progress - This gives your progress throughout the session.
Page 17 ! 1 7...