Table of Contents
Advertisement
English
Features
Protocol detection for VDEW / IEC60870-5-101/103 and DIGSI® protocol (similar to
IEC60870-5-103), UDP protocol without error detection and correction
RS232/RS485 (switchable port) or FO interface for data transfer and modem
configuration.
Serial baudrate and data format to the terminals can be set from 2400 Bd to
115.2 kBd with data formats 8N1, 8N2, 8E1.
Reset to default values (factory settings) with INIT button: 9600 baud, 8N1
An Ethernet interface (10BaseT) to the 10/100 Mbit network.
DIP switch for RS232/RS485 selection and RS485 bus termination and FO idle state
Enhanced security possible by password protection and IP address selection.
LED displays for operating voltage and data traffic are located on the front panel
DIN rail module in the plastic housing with integrated wide-range power supply unit
(24 - 250 V DC and 60 - 230 V AC) permits connection to all common DC or AC
power systems.
Protective conductor (PE) connection
Easy configuration with the configuration tool
10 / 77
7XV5655-0BB00
C53000-G1176-C175-2
Advertisement
Table of Contents
