How To Load Paper (Peeler Model - Supply From Inside) - Epson CW-C6500 Series User Manual

How to Load Paper (Peeler Model - Supply from Inside)

1 Turn on the printer, and then check that
[Internal] is selected as the [Media Source]
setting on the operation panel.
(U"Paper Source Settings" on page
2
Open the paper cover.
3
Remove the spindle from the printer.
As shown in the figure, hold the spindle and flange with
both hands, and remove them.
4 Load the roll paper on the spindle and fix it
with the flange.
• To move the flange, squeeze the two levers.
• When loading the roll paper on the spindle, take note
of the winding direction. The correct winding direc-
tion is marked on the spindle.
• Fix the flange and roll paper so that there is no gap in
between.
5
32)
6
7
Hold the spindle with both hands, and set it in
the printer.
Install the spindle so that both ends of the spindle fit
into the holders inside the printer.
Slide the movable edge guide to the right side.
Squeeze the blue lever to move the edge guide.
Pull the paper along the left edge guide.
Basic Operation
42