Fernox TF1 Quick Reference Manual

TF1 installation and cleaning

Quick Reference Guide

Full instructions enclosed in the TF1 box.
Lid tightening
In the event that the lid of the
TF1 filter has been removed,
ensure the lid is fully re-tightened
to the correct position.
Either line-up the yellow arrow
inside the yellow box on the
side of the TF1 (Diagram A)
or align the embossed marks
on the lid (Diagram B), using
the TF1 spanner provided.
The TF1 unit does not need to be disassembled for installation, cleaning or servicing however if disassembled, replace all
appropriate seals for example the lid collar/bleed valve 'O' rings, as good practice dictates (spares are provided with product
in box). Additional Fernox TF1 Range Seal and 'O' ring kits are available: item number 59288.
Fast clean for TF1 Total Filter & TF1 Compact
– no need to remove lid
1
Close inlet and
outlet valves
A
30 seconds
2
Remove magnet
B
3
Open outlet and
drain valves
4
Close drain valve,
replace magnet and
open inlet valve
www.fernox.com